LOCTITE 222

Threadlocking Adhesive - low strength. Easy disassembly. Suitable for all metal threaded assemblies.

LOCTITE 222 is a low-strength threadlocker that allows the adjustment of screws including countersunk head screws and set screws. Good on low-strength metals which could fracture during disassembly, e.g. aluminium or brass. The product works on all metals, including passive substrates such as stainless steel, aluminium and plated surfaces. t is proven to be tolerant of minor contamination due to industrial oils, e.g. engine oils, corrosion prevention oils and cutting fluids.

Your benefits
◾Ideal for low-strength threadlocking of adjusting screws, countersunk head screws and set screws
◾Prevents loosening on vibrating assemblies, e.g. pumps, gear boxes or presses
◾Permits disassembly with hand tools
◾Especially suited to small thread sizes
◾P1 NSF Reg. No.: 123002

Technical Data
◾Colour: Purple
◾Max. thread size: Up to M36
◾Service temperature range: -55 to +150°C
◾Breakaway torque: 6 Nm
◾Approvals: P1 NSF Reg. No.: 123002
◾Fixture time steel: 15 min.
◾Fixture time brass: 8 min.
◾Fixture time stainless steel: 360 min.
◾Thixotropy: Yes

LOCTITE 243






Threadlocking Adhesive - medium strength. General purpose. Suitable for all metal threaded assemblies.

LOCTITE 243 is a general purpose threadlocker of medium bond strength. This threadlocker secures and seal bolts, nuts and studs to prevent loosening due to vibration. The product works on all metals, including passive substrates such as stainless steel, aluminium and plated surfaces. It is proven to be tolerant of minor contamination due to industrial oils, e.g. engine oils, corrosion prevention oils and cutting fluids.

Your benefits
◾Prevents loosening on vibrating assemblies, e.g. pumps, gear boxes or presses
◾Works on all metals, including passive substrates (e.g. stainless steel, aluminium, plated surfaces)
◾Proven to tolerate minor contamination by industrial oils, e.g. engine oils, corrosion prevention oils and cutting fluids
◾Permits disassembly with hand tools for servicing
◾P1 NSF Reg. No.: 123000

Technical Data
◾Colour: Blue
◾Max. thread size: up to M36
◾Service temperature range: -55 to +180°C
◾Breakaway torque: 26 Nm
◾Approvals: P1 NSF Reg. No.: 123000
◾Fixture time steel: 10 min
◾Fixture time brass: 5 min
◾Fixture time stainless steel: 10 min
◾Thixotropy: Yes

LOCTITE 243


Threadlocking Adhesive - medium strength. General purpose. Suitable for all metal threaded assemblies.

LOCTITE 243 is a general purpose threadlocker of medium bond strength. This threadlocker secures and seal bolts, nuts and studs to prevent loosening due to vibration. The product works on all metals, including passive substrates such as stainless steel, aluminium and plated surfaces. It is proven to be tolerant of minor contamination due to industrial oils, e.g. engine oils, corrosion prevention oils and cutting fluids.

Your benefits
◾Prevents loosening on vibrating assemblies, e.g. pumps, gear boxes or presses
◾Works on all metals, including passive substrates (e.g. stainless steel, aluminium, plated surfaces)
◾Proven to tolerate minor contamination by industrial oils, e.g. engine oils, corrosion prevention oils and cutting fluids
◾Permits disassembly with hand tools for servicing
◾P1 NSF Reg. No.: 123000

Technical Data
◾Colour: Blue
◾Max. thread size: up to M36
◾Service temperature range: -55 to +180°C
◾Breakaway torque: 26 Nm
◾Approvals: P1 NSF Reg. No.: 123000
◾Fixture time steel: 10 min
◾Fixture time brass: 5 min
◾Fixture time stainless steel: 10 min
◾Thixotropy: Yes

LOCTITE 270

Threadlocking Adhesive - high strength. Permanent locking. Suitable for all metal threaded assemblies.

LOCTITE 270 is a high-strength threadlocker for maximum efficacy in the securing and sealing of bolts, nuts and studs to prevent loosening due to vibration. The product serves to permanently lock assemblies which must not come loose. It works on all metals, including passive substrates such as stainless steel, aluminium and plated surfaces. It is proven to be tolerant of minor contamination due to industrial oils, e.g. engine oils, corrosion prevention oils and cutting fluids. Can be disassembled by heating to 300°C.

Your benefits
◾High-strength general threadlocker for maximum efficacy
◾Prevents loosening on vibrating assemblies, e.g. pumps, gear boxes or presses
◾Works on all metals, including passive substrates (e.g. stainless steel, aluminium, plated surfaces)
◾Proven to be tolerant of minor contamination due to industrial oils, e.g. engine oils, corrosion prevention oils and cutting fluids
◾Permits disassembly with hand tools
◾Can be disassembled by heating to 300°C
◾P1 NSF Reg. No.: 123006

Technical Data
◾Colour: Green
◾Max. thread size: Up to M20
◾Service temperature range: -55 to +180°C
◾Breakaway torque: 33 Nm
◾Approvals: P1 NSF Reg. No.: 123006
◾Fixture time steel: 10 min
◾Fixture time brass: 10 min
◾Fixture time stainless steel: 30 min
◾Thixotropy: No

LOCTITE 270

Threadlocking Adhesive - high strength. Permanent locking. Suitable for all metal threaded assemblies.

LOCTITE 270 is a high-strength threadlocker for maximum efficacy in the securing and sealing of bolts, nuts and studs to prevent loosening due to vibration. The product serves to permanently lock assemblies which must not come loose. It works on all metals, including passive substrates such as stainless steel, aluminium and plated surfaces. It is proven to be tolerant of minor contamination due to industrial oils, e.g. engine oils, corrosion prevention oils and cutting fluids. Can be disassembled by heating to 300°C.

Your benefits
◾High-strength general threadlocker for maximum efficacy
◾Prevents loosening on vibrating assemblies, e.g. pumps, gear boxes or presses
◾Works on all metals, including passive substrates (e.g. stainless steel, aluminium, plated surfaces)
◾Proven to be tolerant of minor contamination due to industrial oils, e.g. engine oils, corrosion prevention oils and cutting fluids
◾Permits disassembly with hand tools
◾Can be disassembled by heating to 300°C
◾P1 NSF Reg. No.: 123006

Technical Data
◾Colour: Green
◾Max. thread size: Up to M20
◾Service temperature range: -55 to +180°C
◾Breakaway torque: 33 Nm
◾Approvals: P1 NSF Reg. No.: 123006
◾Fixture time steel: 10 min
◾Fixture time brass: 10 min
◾Fixture time stainless steel: 30 min
◾Thixotropy: No

LOCTITE 275

LOCTITE 275 high strength, high viscosity, large threads threadlocker

Technical Data
◾Maximum thread size: Up to M80
◾Strength: High
◾Breakaway torque M10 bolts: 25Nm
◾Fixture time steel: 15 min.
◾Fixture time brass: 7 min.
◾Fixture time stainless steel: 180 min.
◾Service temperature range: -55°C - +150°C
◾Pack sizes: 50ml, 250ml

LOCTITE 290

Threadlocking adhesive - medium/ high strength. Ideal for locking preassembled fasteners.

LOCTITE 290 is a liquid medium/high-strength threadlocker designed for the locking and sealing of threaded fasteners. Because of its low viscosity and capillary action, the product wicks between engaged threads and eliminates the need for disassembly prior to application. The product cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage due to shock and vibration. The product can also fill porosities in welds, castings and powdered metal parts.

Your benefits
◾Ideal for locking preassembled fasteners, e.g. instrumentation fasteners, electrical connectors and set screws
◾Works on metal only
◾Proven to be tolerant of minor contamination due to industrial oils, e.g. engine oils, corrosion prevention oils and cutting fluids
◾Requires heat for disassembly

Technical Data
◾Colour: Green
◾Max. thread size: Up to M6
◾Service temperature range: -55 to +150°C
◾Breakaway torque: 10 Nm
◾Fixture time steel: 20 min.
◾Fixture time brass: 20 min.
◾Fixture time stainless steel: 60 min.
◾Thixotropy: No

LOCTITE 290

Threadlocking adhesive - medium/ high strength. Ideal for locking preassembled fasteners.

LOCTITE 290 is a liquid medium/high-strength threadlocker designed for the locking and sealing of threaded fasteners. Because of its low viscosity and capillary action, the product wicks between engaged threads and eliminates the need for disassembly prior to application. The product cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage due to shock and vibration. The product can also fill porosities in welds, castings and powdered metal parts.

Your benefits
◾Ideal for locking preassembled fasteners, e.g. instrumentation fasteners, electrical connectors and set screws
◾Works on metal only
◾Proven to be tolerant of minor contamination due to industrial oils, e.g. engine oils, corrosion prevention oils and cutting fluids
◾Requires heat for disassembly

Technical Data
◾Colour: Green
◾Max. thread size: Up to M6
◾Service temperature range: -55 to +150°C
◾Breakaway torque: 10 Nm
◾Fixture time steel: 20 min.
◾Fixture time brass: 20 min.
◾Fixture time stainless steel: 60 min.
◾Thixotropy: No

LOCTITE EA 3450
(Known as LOCTITE 3450 A&B )

Structural Bonding - 2-component epoxy. Fast cure, ideal for metal repair.

LOCTITE EA 3450 is a 2-component epoxy adhesive with structural characteristics. If you need a reliable solution for bonding or repairing of metal parts, this adhesive is the one for you. It has gap filling properties for rough and poorly fitting surfaces such as metal. The adhesive cures rapidly at room temperature, is easy to apply and develops high bond strength.

Your benefits
◾Easy and fast to apply at room temperature
◾Ideal for repairing and bonding metal parts
◾Develops high bond strength

Technical Data
◾Colour: Grey
◾Working life: 4 – 6min.
◾Fixture time: 15min.
◾Service temperature range: -55 to +100°C
◾Tensile strength N/mm²: 25N/mm²
◾Peel strength N/mm: 1,5N/mm
◾Mix ratio by volume: 01:01

LOCTITE EA 3463
(Known as LOCTITE 3463 Magic Metal Steel Stick )

Structural Bonding - 2-component epoxy. Steel-filled kneadable stick for emergency repair.

LOCTITE 3463 is a versatile, dual component, easy to use, steel-filled epoxy repair putty. It is applied like a putty and when cured it exhibits high compressive strength and good adhesion to most surfaces. This product stops leaks in pipes and tanks, fills oversized bolt holes, smoothes welds, and repairs non-structural defects in castings or holes in tanks. This product is typically used in applications with an operating temperature range of -30 °C to +121 °C.

Your benefits
◾Steel-filled kneadable stick
◾For the emergency repair of tanks, pipes and castings
◾Operating temperature range -55 °C to +120 °C.

Technical Data
◾Colour: Grey
◾Working life: 3 min.
◾Fixture time: 10 min.
◾Service temperature range: -30 to +120°C
◾Tensile strength N/mm²: 6,8N/mm²
◾Peel strength N/mm: <1N/mm
◾Mix ratio by volume: N/A

LOCTITE EA 3471
(Known as LOCTITE 3471 )

LOCTITE EA 3471 Metal-filled Compounds - 2K Epoxy, Putty

Your benefits
◾Seal cracks in tanks, castings, vessels and valves
◾Patch non-structural defects in steel casings
◾Resurface worn air seals
◾Repair pitting caused by cavitation and/or corrosion

Technical data
◾Working life: 45 min.
◾Fixture time: 180 min.
◾Shear strength (GBMS): 20 N/mm²
◾Compressive strength: 70 N/mm²
◾Service temperature range: -20 °C to +120 °C
◾Pack sizes: 500g tub kit

LOCTITE 406

Instant Adhesive - low viscosity. Ideal for bonding of plastics and elastomeric materials where very fast fixturing is required.

LOCTITE 406 is an instant adhesive designed especially for the fast bonding of plastics and rubbers. This product offers exceptionally low viscosity. When combined with LOCTITE primers for cyanoacrylates, it can also be used on difficult-to-bond plastics.

Your benefits
◾Rapid bonding of plastic & rubber, including EPDM
◾LOCTITE 770 or LOCTITE 7239 primer improves adhesion of difficult-to-bond substrates

Technical Data
◾Colour: Colourless transparent
◾Fixture time: 2-10 sec.
◾Service temperature range: -40 to + 80°C
◾Max. gap size: 0,05 mm
◾Description: Plastic and rubber, low viscosity

LOCTITE 454
(Known as Loctite 454 Prism Instant Adhesive Gel )

Instant Adhesive - general-purpose gel. Non-drip. Ideal for overhead applications.

LOCTITE 454 is an instant adhesive designed for the assembly of difficult-to-bond materials which require uniform stress distribution and high tensile and/or shear strength. The product provides for the rapid bonding of a wide range of materials, including metals, plastics and elastomers. The gel consistency enables overhead and vertical application. LOCTITE 454 is also suited to bonding porous materials such as wood, paper, leather and fabric. Perfect for all quick repair jobs.

Your benefits
◾Universal instant adhesive gel
◾Will not drip or run
◾Non-wicking, specially suited to porous materials
◾Perfect for all quick repairs
◾Ideal for overhead application and vertical faces
◾Bonds similar or dissimilar substrate combinations of wood, metals, ceramics, most plastics

Technical Data
◾Colour: Colourless transparent
◾Fixture time: 5-10 sec.
◾Service temperature range: -40 to + 120°C
◾Max. gap size: < 0,15 mm
◾Description: Universal, gel

LOCTITE 480

Instant Adhesive - toughened. Ideal for bonding metal to metal, to rubber or magnets. Good resistance in humid environments. Fast curing.

LOCTITE 480 is an instant adhesive designed for the assembly of difficult-to-bond materials which require uniform stress distribution and high tensile and/or shear strength. It is a rubber-reinforced adhesive offering increased flexibility and peel strength along with enhanced shock resistance. The product provides for the rapid bonding of a wide range of materials, including metals, plastics and rubbers. The product exhibits good resistance in humid environments.

Your benefits
◾For applications where shock resistance is required or shock or peel loads are present
◾Ideal for bonding metal to metal, to rubber or magnets
◾Good resistance in humid environments

Technical Data
◾Colour: Black
◾Fixture time: 20-50 sec.
◾Service temperature range: -40 to + 100°C
◾Max. gap size: < 0,15 mm
◾Description: Thoughend, black, slow

LOCTITE 510

Gasketing Product- high temperature and chemical resistance. Ideal for use on rigid flanges.

LOCTITE 510 is a high temperature resistant anaerobic sealant which cures when confined in the absence of air between close-fitting metal surfaces. Typical applications include sealing rigid flange faces on transmissions and engine casings. It ensures an instant, low-pressure seal. The product increases the torque capacity of assembled flanges.


Your benefits
◾High temperature resistant flange gasket
◾For metal flanges
◾Adapts to flange surface irregularities and scratches up to 0.25 mm
◾Increases the torque capacity of assembled flanges
◾P1 NSF Reg. No.: 123007


Technical Data
◾Colour: Pink
◾Max. gap size: 0.25 mm
◾Service temperature range: -55 to + 200°C
◾Tensile shear strength in N / mm²: 5
◾Substrate to be sealed: Metals
◾Fixture time steel: 25 min.
◾Fixture time Aluminium: 45 min.

LOCTITE 518 Gasket Sealant

Medium-strength, general purpose gasketing product - excellent contamination tolerance. Ideal for use on casted iron, steel and aluminum flanges.

LOCTITE 518 cures when confined in the absence of air between close-fitting metal surfaces. It is an anaerobic gasketing material designed for use on rigid iron, aluminum, and steel flanged mating surfaces. Fills gaps up to 0.25mm and forms a flexible, chemical-resistant seal that will not tear or decay. Parts disassemble easily, even after extended service.
Typical applications include sealing close-fitting joints between rigid metal faces and flanges. It is also used as a formed-in-place gasket on rigid flanged connections, e.g. transmissions and engine housings.

NEW: Henkel has recently improved the product formulation of LOCTITE 518 providing:
◾Higher strength on contaminated surfaces
◾Better flexibility and improved adhesion
◾Enhanced sealing capability
◾Improved gap cure
◾High performance on passive metals without an activator


Your benefits
◾Semi-flexible, medium-strength anaerobic flange gasket
◾For active and inactive rigid metal flanges
◾Cures through minor surface contamination
◾Adapts to flange surface irregularities and gaps up to 0.25 mm
◾Gel-type consistency
◾Seals instantly against low pressure
◾Reduces inventory costs – no need for large inventory of cut gaskets
◾Resists high pressure when fully cured
◾No compression set or misaligned gaskets
◾Easy to automate
◾Reduces process costs – eliminates manual assembly of conventional gaskets
◾NSF P1 Reg. No. 123758

LOCTITE 542

Thread Sealant - medium strength. For fine threads in hydraulic, pneumatic and general fittings. Fast curing.

LOCTITE 542 is designed for the locking and sealing of metal pipes and fittings as well as other cylindrical metal assemblies. The product cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage due to shock and vibration. The thixotropic nature of LOCTITE 542 reduces the migration of liquid product after application to the part.

Your benefits
◾Ideal for fine threads as used in hydraulic, pneumatic & general fittings
◾Suitable for metal threads only
◾Instant low-pressure seal
◾Resistant to fuel, oil, coolants and hydraulic fluids
◾Locks connection against vibration loosening
◾DVGW approval (EN 751-1): NG-5146AR0855

Technical Data
◾Colour: Brown
◾Max. thread size: M26 / R3/4
◾Service temperature range: -55 to +150°C
◾Breakaway torque: 15 Nm
◾Approvals: DVGW, WRAS
◾Disassembly strength: Medium
◾Thixotropy: No

LOCTITE 542

Thread Sealant - medium strength. For fine threads in hydraulic, pneumatic and general fittings. Fast curing.

LOCTITE 542 is designed for the locking and sealing of metal pipes and fittings as well as other cylindrical metal assemblies. The product cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage due to shock and vibration. The thixotropic nature of LOCTITE 542 reduces the migration of liquid product after application to the part.

Your benefits
◾Ideal for fine threads as used in hydraulic, pneumatic & general fittings
◾Suitable for metal threads only
◾Instant low-pressure seal
◾Resistant to fuel, oil, coolants and hydraulic fluids
◾Locks connection against vibration loosening
◾DVGW approval (EN 751-1): NG-5146AR0855

Technical Data
◾Colour: Brown
◾Max. thread size: M26 / R3/4
◾Service temperature range: -55 to +150°C
◾Breakaway torque: 15 Nm
◾Approvals: DVGW, WRAS
◾Disassembly strength: Medium
◾Thixotropy: No

LOCTITE 574

Gasketing Product - general purpose. Ideal for use on machined and rigid metal flanges

LOCTITE 574 seals close-fitting joints between rigid metal faces and flanges. The product cures when confined in the absence of air between close-fitting metal surfaces. It provides resistance to low pressures immediately after assembly. Typically used as a form-in-place gasket on rigid flanged connections. The nature of LOCTITE 574 reduces the migration of liquid product after application to the substrate. It has a high oil tolerance and excellent water and glycol resistance.


Your benefits
◾Ideal for use on rigid metal parts, e.g. cast iron components and pump housings
◾High oil resistance
◾Excellent water and glycol resistance

Technical Data
◾Colour: Orange
◾Max. gap size: max. 0,25 mm
◾Service temperature range: -55 to +150°C
◾Tensile shear strength in N / mm²: 8,5
◾Substrate to be sealed: Metals
◾Fixture time steel: 15 min.
◾Fixture time aluminium: 45 min.

LOCTITE SI 5910 RTV Silicone Flange Sealant
(Known as LOCTITE 5910 )

LOCTITE SI 5910 for flexible flanges, machined or casted surfaces, metal or plastic

Technical Data
◾Colour: Black
◾Service temperature range: -60°C - +200°C
◾Tensile shear strength: 1.2N/mm²
◾Max. gap: 1mm
◾Skin over time: 40 min.
◾Cure through volume in 24 h: 2.75 mm
◾Strength: Low
◾Cure method: Moisture (Silicone)
◾Pack sizes: 50ml cartridge, 300ml cartridge, 80ml tube, 200ml rocep can

Loctite 5922
(Known as LOCTITE 5922 )

Loctite 5922 - Improves the sealing performance of old and new pre-cut gaskets

Your benefits
◾Improves the sealing performance of old and new pre-cut gaskets (paper, cork, felt, etc.)
◾Slow curing paste
◾Sets to a permanently flexible, non-hardening film
◾Suitable for parts which require disassembly

Application
◾On engine and gearbox. For sealing/dressing flanges with old and new pre-cut compression gaskets. Ideal for part assembly after repairs.

Technical Data
◾Flange type: Rigid or flexible
◾Service temperature range: -54°C - +204°C
◾Oil resistance: Good
◾Water / glycol resistance: Good
◾Pack sizes: Tube (blister card) 60ml

LOCTITE SI 5926
(Known as LOCTITE 5926 )

Gasketing Product - multi-purpose flexible silicone sealant. Ideal for use on flexible flanges, machined or cast surfaces, metal or plastic.

LOCTITE SI 5926 is a multi-purpose flexible silicone sealant and cures on exposure to moisture in the air to form a tough rubber gasket. This product resists aging, weathering and thermal cycling without hardening, shrinking or cracking. Typical applications include valve covers, timing gear covers, differential covers, oil pans, transmission pans, water pumps, and thermostat housings. This product is typically used in applications with an service temperature of -55 °C to +200 °C.

Your benefits
◾Multi-purpose flexible silicone sealant. Can be used on metal, plastic and painted parts
◾Resists vibration, thermal expansion and contraction
◾Service temperature range of -55 °C to +200 °C
Technical Data◾Colour: Blue
◾Max. gap size: 1 mm
◾Service temperature range: -55 to +200°C
◾Tensile shear strength in N / mm²: -
◾Substrate to be sealed: Metals and plastics
◾Skin over time: 60 min.
◾Cure through volume in 24h [mm]: 2,5 mm

LOCTITE 603

Retaining Compound - high strength. Ideal for bearings. For use on close-fitting cylindrical parts. High oil tolerance.

LOCTITE 603 is a high-strength retaining compound. Designed for the bonding of cylindrical fitting parts, especially for sintered bearings and also where consistently clean surfaces cannot be assured. The product cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage due to shock and vibration. It has a high oil tolerance.

Your benefits
◾High-strength retaining compound
◾Especially suitable for sintered bearings
◾High oil tolerance

Technical Data
◾Colour: Green
◾Max. gap size: 0,1 mm
◾Service temperature range: -55 to +150°C
◾Tensile shear strength in N / mm²: > 22,5
◾Approvals: P1 NSF, WRAS
◾Fixture time steel: 8 min.
◾Thixotropy: No

LOCTITE 603

Retaining Compound - high strength. Ideal for bearings. For use on close-fitting cylindrical parts. High oil tolerance.

LOCTITE 603 is a high-strength retaining compound. Designed for the bonding of cylindrical fitting parts, especially for sintered bearings and also where consistently clean surfaces cannot be assured. The product cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage due to shock and vibration. It has a high oil tolerance.

Your benefits
◾High-strength retaining compound
◾Especially suitable for sintered bearings
◾High oil tolerance

Technical Data
◾Colour: Green
◾Max. gap size: 0,1 mm
◾Service temperature range: -55 to +150°C
◾Tensile shear strength in N / mm²: > 22,5
◾Approvals: P1 NSF, WRAS
◾Fixture time steel: 8 min.
◾Thixotropy: No

LOCTITE 638

Retaining Compound - high strength. General purpose. Fast curing.

LOCTITE 638 is designed for the bonding of cylindrical fitting parts, particularly where bond gaps can approach 0.25 mm. The product cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage due to shock and vibration. It not only works on active metals but also on passive substrates, exhibiting robust cure performance. The product offers high-temperature performance and good oil tolerance, and tolerates minor surface contaminants.

Your benefits
◾High temperature resistance
◾Tolerates minor contaminants, including industrial oils
◾High strength on all metals, including passive substrates (e.g. stainless steel)
◾Ideal for shafts, gears, pulleys and similar cylindrical parts
◾P1 NSF Reg. No.: 123010
◾DVGW Approval (EN 751-1): NG-5146AR0619
◾WRAS Approval (BS 6920): 0511518

Technical Data◾Colour: Green
◾Max. gap size: 0,25 mm
◾Service temperature range: -55 to +180°C
◾Tensile shear strength in N / mm²: > 25
◾Approvals: P1 NSF Reg. No.: 123010
DVGW Approval (EN 751-1): NG-
5146AR0619
WRAS Approval (BS 6920): 0511518
◾Fixture time steel: 4 min.
◾Thixotropy: No

LOCTITE 641

Retaining Compound - medium strength. If disassembly is required. Ideal for parts that need subsequent dismantling.

LOCTITE 641 is designed for the bonding of cylindrical fitting parts, particularly where disassembly is required for servicing operations. The product cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage due to shock and vibration. Ideal for parts that need subsequent dismantling, i.e. retention of bearings on shafts and in housings.

Your benefits
◾Ideal for parts that need subsequent dismantling, i.e. retention of bearings on shafts and in housings
Technical Data◾Colour: Yellow
◾Max. gap size: 0,1 mm
◾Service temperature range: -55 to +150°C
◾Tensile shear strength in N / mm²: > 6,5
◾Fixture time steel: 25 min.
◾Thixotropy: No

LOCTITE 641

Retaining Compound - medium strength. If disassembly is required. Ideal for parts that need subsequent dismantling.

LOCTITE 641 is designed for the bonding of cylindrical fitting parts, particularly where disassembly is required for servicing operations. The product cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage due to shock and vibration. Ideal for parts that need subsequent dismantling, i.e. retention of bearings on shafts and in housings.

Your benefits
◾Ideal for parts that need subsequent dismantling, i.e. retention of bearings on shafts and in housings
Technical Data◾Colour: Yellow
◾Max. gap size: 0,1 mm
◾Service temperature range: -55 to +150°C
◾Tensile shear strength in N / mm²: > 6,5
◾Fixture time steel: 25 min.
◾Thixotropy: No

LOCTITE 648

Retaining Compound - high strength. High temperature resistance. Ideal for retention of parts with a clearance or interference fit.

LOCTITE 648 is designed for the bonding of cylindrical fitting parts. The product cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage due to shock and vibration. It exhibits a robust curing performance. The product also works on passive substrates and offers high-temperature performance and good oil tolerance.

Your benefits
◾High temperature resistance
◾Proven to be tolerant of minor contamination due to industrial oils
◾High strength on all metals, including passive substrates (e.g. stainless steel)
◾Ideal for retention of parts with a clearance or interference fit
◾P1 NSF Reg. No.: 148350
◾DVGW Approval (EN 751-1): NG 5146C00236
◾WRAS Approval (BS 6920): 0808532

Technical Data
◾Colour: Green
◾Max. gap size: 0,15 mm
◾Service temperature range: -55 to +180°C
◾Tensile shear strength in N / mm²: > 25
◾Approvals: P1 NSF Reg. No.: 148350, DVGW Approval (EN 751-1): NG 5146C00236, WRAS Approval (BS 6920): 0808532
◾Fixture time steel: 3 min.
◾Thixotropy: No

LOCTITE 660

Retaining Compound - high strength. Gap filling. For repair of worn-out seats, keys, splines, bearings or tapers without remachining.

LOCTITE 660 is designed for the bonding of cylindrical fitting parts, particularly where bond gaps occurs such with worn parts, without the need for remachining. The product cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage due to shock and vibration. This product exhibits excellent gap cure characteristics and is also suitable for retaining shims.

Your benefits
◾Ideal for repairing worn parts without remachining
◾Enables re-use of worn bearing seats, keys, splines or tapers
◾Suitable for retaining shims
◾P1 NSF Reg. No.: 123704

Technical Data:
◾Colour: Silver
◾Max. gap size: 0,5 mm
◾Service temperature range: -55 to +150°C
◾Tensile shear strength in N / mm²: > 17,2
◾Approvals: P1 NSF
◾Fixture time steel: 15 min
◾Thixotropy: Yes

LOCTITE SF 7061
(Known as LOCTITE 7061 )

LOCTITE SF 7061 general purpose parts cleaner and degreaser (based on acetone) prior to bonding

Your benefits
◾Solvent based (acetone) general parts cleaner
◾Very fast evaporation
◾Removes dirt, resins, lacquer, oils and greases

Application area
◾Metal working industry, workshops, machines

LOCTITE SF 7063
(Known as LOCTITE 7063 )

Parts Cleaner - general purpose. For use prior to bonding and sealing applications. Leaves no residue.


LOCTITE SF 7063 is our general-purpose product for cleaning and degreasing any kind of surface or machinery component before proceeding with a repair or assembly job involving LOCTITE adhesives. It is a solvent-based cleaner and the product leaves no residue. LOCTITE 7063 removes most greases, oils, lubrication fluids and metal cuttings.


Your benefits
◾Solvent-based general parts cleaner
◾Ideal for use prior to adhesive bonding and sealing applications
◾Leaves no residue
◾Removal of most greases, oils, lubrication fluids, metal cuttings and fines from all surfaces

Technical Data
◾Description: General purpose cleaner and degreaser
◾Base: Solvent

LOCTITE EA 3473
(Known as LOCTITE 3473 )

LOCTITE EA 3473 Metal-filled Compounds - 2K Epoxy, Fast cure

Fast curing, steel filled, nonsagging. Reaches functional cure in approx. 10 minutes. Ideal for emergency repair and repairing worn metal parts to prevent downtime.

Your benefits
◾Repair holes in tanks, leaks in pipes and elbows
◾Renew stripped threads
◾Rebuild worn steel parts

Technical data
◾Working life: 6 min.
◾Fixture time: 15 min.
◾Shear strength (GBMS): 20 N/mm²
◾Compressive strength: 60 N/mm²
◾Service temperature range: -20 °C to +120 °C
◾Pack sizes: 500g tub kit

LOCTITE SI 5366
(Known as LOCTITE 5366 )

LOCTITE SI 5366 structural bonding - 1K silicone, general purpose

Your benefits
◾General purpose 1-component silicone
◾Clear colour
◾Suitable for glass, metal, ceramics…

Technical Data
◾Description: 1K acetoxy silicone
◾Colour: clear
◾Elongation at break: 530%
◾Hardess shore A: 25
◾Shear strength (GBMS) N/mm²: 2,5
◾Service temperature range: +250 °C
◾Pack sizes: 50ml, 310ml, 1l, 25kg

LOCTITE SI 5399
(Known as LOCTITE 5399 )

LOCTITE SI 5399 structural bonding, 1K silicone, high temperature resistance

Your benefits
◾High temperature resistant 1-component silicone
◾For bonding and sealing glass, metal and ceramics e.g. industrial ovens, stove flues…

Technical Data
◾Description: 1K acetoxy silicone
◾Colour: red
◾Elongation at break: 500%
◾Hardess shore A: 33
◾Shear strength (GBMS) N/mm²: 3,3
◾Service temperature range: +300 °C
◾Pack sizes: 310ml, 20l

LOCTITE 567 Thread Sealant with PTFE

Loctite® 567™ Thread Sealant with PTFE is a general purpose instant thread sealant for taper/taper threads and fittings.

LOCTITE 567 for metal, low strength, coarse threads threadsealant

Technical Data
◾Maximum pipe size: 3
◾Disassembly strength: Low
◾Service temperature range: -50°C - +200°C
◾Breakaway torque: 1.7 Nm
◾Pack sizes: 6ml, 50ml, 250ml

Your benefits

Features and Benefits
• General purpose, low strength liquid thread sealant for sealing metal threads
• Prevents leaks due to vibrational loosening and other stresses
• Temperature resistance up to 480°F (250°C)
• Controlled Strength for easy disassembly
• Excellent chemical resistance
• Easy to apply
• Cures on active and inactive metals
• Lubricates to avoid galling on stainless steel fittings
• NSF/ANSI 61 Approved
• UL and ULC Approved

LOCTITE 573

Gasketing Product - slow curing. Ideal for use on machined and rigid metal flanges.


LOCTITE 573 seals close-fitting joints between rigid metal faces and flanges. The product cures when confined in the absence of air between close-fitting metal surfaces. Typically used as a form-in-place gasket on rigid flanged connections, e.g. transmission and engine casings, etc. It is the ideal product for part assembly jobs extending over several hours. The nature of LOCTITE 573 reduces the migration of liquid product after application to the part.


Your benefits
◾Typically used as a form-in-place gasket on rigid flanged Connections
◾Ideal for sealing large, rigid metal flanges or flanges where assembly may take up to several hours


Technical Data
◾Colour: Green
◾Max. gap size: 0.1 mm
◾Service temperature range: -55 to +150°C
◾Tensile shear strength in N / mm²: 1,3
◾Substrate to be sealed: Metals
◾Fixture time steel: 9 h
◾Fixture time aluminium: 12 h

LOCTITE 577 Thread Sealant

Medium-strength, general purpose thread sealant for straight/straight and straight/taper threads and fittings. Fills the space between threaded parts and seals and locks at the same time.

LOCTITE 577 is designed for the locking and sealing of metal pipes and fittings as well as other threaded assemblies. The product provides an instant, low-pressure seal for metal pipes and fittings. It will not creep, shrink or shred. It has excellent chemical and thermal resistance and offers less migration of liquid product after application.

NEW: Henkel has recently improved the product formulation of LOCTITE 577 providing:
◾Higher strength on contaminated surfaces
◾Improved thermal performance
◾High performance on passive metals without an activator


Your benefits
◾Medium-strength, general purpose thread sealant for sealing metal threads
◾Suitable for all metals
◾Instant low pressure seal
◾Excellent chemical resistance
◾Locks connection against vibration-induced loosening and other stresses
◾Easy to apply
◾Cures on active and inactive metals
◾NSF P1 Reg. No. 123001
◾DVGW Approval (EN 751-1): DVGW Reg. No. NG-5146CQ0312

LOCTITE SI 5900
(Known as LOCTITE 5900 )

LOCTITE SI 5900 thixotropic paste, black, excellent in engine oils

Technical Data
◾Colour: Black
◾Service temperature range: -55°C - +200°C
◾Tensile shear strength: 1.2N/mm²
◾Max. gap: 1mm
◾Skin over time: 15 min.
◾Cure through volume in 24 h: 2.5 mm
◾Strength: Low
◾Cure method: Moisture (Silicone)
◾Pack sizes: 300ml