• Strong, heavy duty body, with strengthened fork and lever, allows for greater force to be applied
• Can be upgraded to hydraulic power (use 08075000 Upgrade Kit)

• Specification:
- Jaw Opening: 70mm
- Jaw Throat Width: 36mm
- Jaw Throat Depth: 50mm

Spare Parts:
• 08071170 - M24 x 3.0 x 140mm Screw
• 08071470 - Pivot Pin

• For lowering of the suspension arm and the separation of suspension components
• Reduces the effort required, due to the unique design which uses leverage and the technicians’ own bodyweight to create the force required
• Adjustable, multi-position swing point allows for variable applications – both LH & RH

• Spare Parts:

• 08080170 - Location Pin
• 08080270 - Replacement Hook

WHEEL BEARING REMOVAL & INSTALLATION

• For the removal of bearings, races, sleeves etc

• Ideal tool for the removal of bearing rings from hubs, axles etc

• Removes the need for cutting tools - greatly reduces bearing ring removal time

• Unique patented design - specially designed cutting edges on puller legs

• Legs ‘cut’ and are pressed into the radius behind the bearing ring

• ‘Loose / Tight’ pulling principal means force is applied evenly at all points on the bearing ring

• Suitable for all types of bearings and rings from 40 - 60mm diameter

• Supplied in plastic toolbox for safe storage

Specification:

• Spread: 40-60mm • Reach: 85mm

Spare Parts:

• 08101500 - Set of 3 legs • 08101170 - Force Screw

WHEEL BEARING REMOVAL & INSTALLATION

• Universal set for the removal and installation of flanges and wheel bearings, without the need for removal of suspension struts or wheel hubs from the vehicle (where access permits)

• Supplied in storage case – all components available individually as spare parts

• Remove and install wheel bearing without hub removal

- Virtually eliminates damage to vehicle components

- Removes the need to remove stubborn hub pinch bolt found on modern VAGs such as Audi A4, VW Passats etc

• Tool configures square to bearing – No more having to square hub assembly on hydraulic press

• Bearings fitted on nut assemblies – Greatly reduced drag in pushing bearing in / out

• Flange extraction bolts supplied - Reduces time taken to complete overall job

Spare Parts:

• 08121270 - M12 x 1.5 Wheel Hub Bolt • 08121370 - M14 x 1.5 Wheel Hub Bolt

• 08120570 - Main Spindle with Thrust Bearing • 08120870 - Main Nut & Bearing

WHEEL BEARING REMOVAL & INSTALLATION

• The GEN 2 type of wheel bearing is predominantly fitted to models from Ford, Land Rover, Mazda, VW Group and Volvo

• Includes a variety of different diameter tool kits covering a range of sizes to suit the different GEN2 bearings used by vehicle manufacturers

• Designed to distribute pressing force evenly through the outer bearing race and also allows for the suspension leg to remain in-situ on the vehicle when fitting new bearings

72mm - Audi A1, Audi A2, Seat Cordoba, Ibiza, Skoda Fabia, Roomster, VW Polo (Front), VW Fox with PAS (Front)

• For when greater impact is required
• Hub pullers can be further enhanced when using this heavy duty tool, which is fully compatible and can be fitted directly into the Puller Ring Plate

Successful removal of troublesome inner bearing race and reinstallation of complete bearing assembly

• For the removal and installation of the front wheel bearing on Ford Transits 2000-2013 with the aid of a workshop press
• Removes and installs bearings on both 5 and 6 stud hubs
• Removes the inner and outer bearing race

Contents include:
- Hub support for new bearing installation
- 5 x supporting pillars and stand for bearing removal
- 2 x adaptors for insertion and removal
- Special separator for inner ring removal

• Contains 10 x Press Sleeves in 2mm diameter steps
• Inside Diameter Range: 14 - 32mm
• Outside Diameter Range: 24 - 42mm
• Includes 2 x spindles, 4 x stepped back plates, extension spindle with thrust bearing, lock nuts and grease
• Supplied in moulded storage case

• Upgrade kit from 08790000 to complete 08797500
• For owners of kit 08790000 (SUV / LCV) who wish to upgrade to the full contents of the combined LCV / HGV Kit (08797500 - below)

• Suitable for most popular car applications

• Specification:

- Jaw Opening: 45mm

- Jaw Throat Width: 19mm

- Jaw Throat Depth: 30mm

Extra heavy duty puller for the removal of drop arms from the toughest of vehicle applications.

• Ideal for Land Rover Discovery 1 & 2, Range Rover P38, Land Rover Defender and Ford Transit applications
• The puller is designed to be used with the steering box already removed from the vehicle
• Includes a force screw allowing the user to effectively shock the drop arm to become loose from the steering box
   

Jaw spread capacity - 60mm

Jaw reach capacity - 80mm

• Simple tool to use with ‘vibro-impact’ air hammer (90206000) when bolt ends protrude from housing.
• Sleeve guides the impact end to free off and push bolt through the housing.
• Extension adaptor for removing bolts when pushed deep in the housing

• Unique 4-way lever design allows for a wide variety of applications
• 4 options are available, by removing the pin and selecting any of the 4 positions
• Tapered, slim jaw fork design with tough, black epoxy coating
  
  Specification:
• - Jaw Opening: 24 / 30 / 40 / 45mm options
• - Jaw Throat Width: 19mm
• - Jaw Throat Depth: 30mm
  
  Spare Parts:
  • 080511V2 - Force Screw
  • 080514V2 - Retaining Pin

• Long reach tool, ideal for ease of access, without being restricted by wheel arches

Specification:
- Length: 400mm
- Jaw Throat Width: 18mm
- Jaw Throat Depth: 70mm

• Drop forged rugged, flat design with 3 interchangeable forks
• Forks are attached to the centre screw to allow continuous adjustment within the jaw capacity range
• Features an internally operated drive spindle (M24) and an elongated recess in the forks, providing a safe & secure operation
• Jaw capacity range: 30 - 65mm
• 3 x fork sizes: 24, 27 and 31mm
• Ideal for use on vehicles: Audi / VW (A3, A4 and A6 with double wishbone), BMW & Mercedes-Benz

• An innovative tool for detecting suspension and axle joint wear
• For detecting faults in suspension joints / struts, wheel bearings, stabilizers, bushes & ball-joints, steering gear & links

• Specialist tool for the removal of CV Joints on front wheel drive cars
• Avoids the need to remove the entire front axle
• No need to use a hammer – reduces risk of damage to the drive axle
• Approved as a special tool by VW Group - Audi, Seat, Skoda, VW – Ref: T20181

The GEN 2 type of wheel bearing is predominantly fitted to models from Ford, Land Rover, Mazda, VW Group and Volvo

Includes a variety of different diameter tool kits covering a range of sizes to suit the different GEN2 bearings used by vehicle manufacturers

Designed to distribute pressing force evenly through the outer bearing race and also allows for the suspension leg to remain in-situ on the vehicle when fitting new bearings

GEN2 Bearing Removal Combination Tool Kit
62 / 66 / 72 / 78 / 82 / 85mm
• Combination Kit for Audi / Seat / Skoda / VW applications
• Consists of all necessary parts from the 62, 66, 72, 78, 82 & 85mm kits

• 62mm Kit - Audi A2, VW Lupo (Front)
• 66mm Kit - Skoda Fabia, VW Fox (Front), Polo
• 72mm Kit - Audi A1, Audi A2, Seat Cordoba, Ibiza, Skoda Fabia, Roomster, VW Polo (Front), VW Fox with PAS (Front)
• 78mm Kit - Ford Focus II, C-Max, Volvo C30, C70, S40, V50 (Front), Mazda 3
• 82mm Kit - Ford Mondeo, Galaxy, S-Max, Land Rover Freelander 2, Volvo S80, V70, XC60, XC70
• 85mm Kit - VW Multivan, Touareg, Transporter (Front / Rear)

WHEEL BEARING REMOVAL & INSTALLATION

• The GEN 2 type of wheel bearing is predominantly fitted to models from Ford, Land Rover, Mazda, VW Group and Volvo

• Includes a variety of different diameter tool kits covering a range of sizes to suit the different GEN2 bearings used by vehicle manufacturers

• Designed to distribute pressing force evenly through the outer bearing race and also allows for the suspension leg to remain in-situ on the vehicle when fitting new bearings

78mm - Ford Focus II, C-Max, Volvo C30, C70, S40, V50 (Front), Mazda 3

WHEEL BEARING REMOVAL & INSTALLATION

• The GEN 2 type of wheel bearing is predominantly fitted to models from Ford, Land Rover, Mazda, VW Group and Volvo

• Includes a variety of different diameter tool kits covering a range of sizes to suit the different GEN2 bearings used by vehicle manufacturers

• Designed to distribute pressing force evenly through the outer bearing race and also allows for the suspension leg to remain in-situ on the vehicle when fitting new bearings

85mm - VW Multivan, Touareg, Transporter (Front / Rear)

• The GEN 2 type of wheel bearing is predominantly fitted to models from Ford, Land Rover, Mazda, VW Group and Volvo

• Includes a variety of different diameter tool kits covering a range of sizes to suit the different GEN2 bearings used by vehicle manufacturers

• Designed to distribute pressing force evenly through the outer bearing race and also allows for the suspension leg to remain in-situ on the vehicle when fitting new bearings

82mm - Ford Mondeo, Galaxy, S-Max, Land Rover Freelander 2, Volvo S80, V70, XC60, XC70

• Use in conjunction with 12731100 Impact Force Screw - allows for greater force to be applied
• When used together, Shock handle (08251900) and Impact Force Screw (12731100) can convert 1500 series hydraulic rams to mechanical. In addition the impact shock handle to screw has a sliding centre spindle which allows the operator
  to strike the end when fully loaded. This assists the release of stubborn joints or taper fits.

• Includes larger hub plate and extra-long pillars enabling owners of the 08254500 Ford Transit Hub & Front Wheel Bearing Remover Kit to remove hubs and front wheel bearings on six stud Transits

Optional Small Jaw - 80-115mm diameter for the Heavy Duty Coil Spring Compressor below (08390000)

08390000 - Unique Sykes-Pickavant designed vice-mounted Coil Spring Compressor

• Features double-ended hex drive (2 x 24mm hex) for ease of use

- Can be operated from either end using ratchet or 24mm wrench

- Can be safely unwound in the event of shear pin failure

• Hex drives at both ends, incorporate shear-pins for safety

- Features external thrust bearing for ease of service

- Heat treated, Self-lubricating operating screw

• Safe Working Load = 15000N

• Supplied with two sets of universal jaws:

- Medium Jaws: 110-150mm diameter

- Large Jaws: 140-195mm diameter

• N.B. Not recommended for use with Air / Electric Impact Power Tools

• 084000 Series jaws can also be used with 08390000 Coil Spring Compressor (Requires 08393200 Screws)

Small jaw covers - plastic. For use with the optional Small Jaws ( 08390100 )

Medium jaw covers - plastic. For use with the medium jaws supplied with 08390000 ( 08390270 )

• Safe working load 2250kg (22500N)
• Supplied with 1 x pair of universal MULTIPURPOSE jaws
- Patented innovative shape of jaw design fits most types and sizes of springs
- Protective high-tech inserts in jaw for added safety
- Jaws diameter 80-200mm covers 90% of applications
• Built-in protective accessory for vice clamping
• Large user friendly adjustable handle for fast jaw positioning
• Overload shear pin for safe operator use
• Range of specialist jaw options available
• TUV approved
• Supplied with full instructions and vehicle applications
 

Spare Parts:
• 08400100 - Universal Jaw (single) • 08402400 - Shear Pin

Extra Small jaw - 80-120mm diameter for use with the Heavy Duty Coil Spring Compressor (08400000)

Note: Optional Specialist Jaws are supplied as singles

Jaw for Conical Springs 80 - 145mm for the Heavy Duty Coil Spring Compressor (08400000)

Note: Optional Specialist Jaws are supplied as singles

Jaw for BMW 3 series E46, E90, 5 series E39,E60, F10 Renault Megane 2, 3 for the Heavy Duty Coil Spring Compressor (08400000)

Note: Optional Specialist Jaws are supplied as singles

Jaw for Mercedes C Class for the Heavy Duty Coil Spring Compressor (08400000)

Note: Optional Specialist Jaws are supplied as singles

Jaw for Mercedes E Class, for the Heavy Duty Coil Spring Compressor (08400000)

Note: Optional Specialist Jaws are supplied as singles

Workbench or wall-mounted for operator safety

• Minimizes risk of injury & improves safety

• Cage has hinged opening and dedicated slot in the base for securing the 08400000 HD Coil Spring Compressor (above)

UPDATED KIT NOW INCLUDES 70MM PINS FOR INCREASED APPLICATIONS

• Fixes the piston rod in position when replacing coil springs
• Prevents the piston rod from being drawn back into the strut

• For removal and installation of rear axle carrier mounting bushes X5 ( E53 ) models

• Consumable spares kit : 08720311

• For the installation of bonded rubber / plastic type rear axle mounting bushes, on Audi A3, VW Golf 4, VW Bora - all models 2001 - 2004

N.B. Most models were originally fitted with hydraulic type rubber bushes when new - These can be knocked out manually. This tool is required for fitting the new bonded rubber / plastic type replacement bushes. Always replace in pairs.

Spare Parts:

• 08760111 - Consumable Spares Kit

• For removal and installation of the rear bush on the front control arm, as fitted on:

- VW Polo 11 - ‘01-

- Seat Cordoba 11 - 2002-

- Skoda Fabia 12 - 1999-

Spare Parts:
• 08760211 - Consumable Spares Kit

WHEEL BEARING REMOVAL & INSTALLATION

• Universal Support for use with a workshop press

• Three point contact guarantees a perfect, safe support

• Easily press bearings on a wide variety of suspension arms

• Features:

- Adjustable height anvil bolts

- Swivel element for added versatility

- Safety Alignment brackets for security on press

Spare Parts:

• 08770570 - Replacement Pressure Bolt Set (13 pcs)

• Complete kit for SUV, LCV, PSV, HGV
• Contains 20x Press Sleeves in 2mm diameter steps
• Inside Diameter Range: 74 - 112mm in 2mm steps
• Outside Diameter Range: 84 - 122mm in 2mm steps
• 4x Step Plate Discs / 4x Pulling Spindles with nuts & thrust bearings M10 / M12 / M14 / M16
• 2 x 20mm Heavy Duty Pulling Spindles (M20 long & M20 short) with thrust bearings
• Supplied in moulded storage case

• Can be used in any SP Hub Puller in place of Hydraulic Ram or Slide Hammer (11/2” BSW thread)
• When used together, Shock handle (08251900) and Impact Force Screw (12731100) can convert 1500 series hydraulic rams to mechanical. In addition the impact shock handle to screw has a sliding centre spindle which allows the operator to strike the end when fully loaded. This assists the release of stubborn joints or taper fits.

Updated kit now uses power from the SP 12 tonne hydraulic ram
• Hydraulic version of the 08070000 HGV Ball Joint Separator
• Specification:
- Jaw Opening: 70mm
- Jaw Throat Width: 36mm
- Jaw Throat Depth: 50mm

• Updated unit now provides greater power
• Allows easier operation - 50% more capable using the SP 12 tonne Hydraulic Ram
• Includes adaptor ring for use with 08780000 Universal Press & Pull Sleeve Kit
• Can be used in the following formats:
- On its own as a stand alone tool
- With Universal Press & Pull sleeve kits
• Open frame design - 200mm of clearance through the press frame
• Ideal for use with individual model specific press piece sets

• Includes adaptor ring (18780400) for use with 08780000 and related press piece sets
• Can also be used with 8 or 12 Tonne SP hydraulic ram and press frame pressure screw

Kit includes adaptor set for the removal and installation of trailing arm bushes,18700100 Press Frame and 18704100 Pressure Screw

Bush OEM reference numbers:
Fiesta - 1011363, 1016439, 96FB5K653CA
Focus - 1 061 670, 1304124

Focus Applications:
- C-MAX ‘07- MPV
- MKI ‘98-’04 Estate, Hatchback, Saloon, Van
- MKII ‘04- Convertible, Hatchback, Saloon, Van
- Kuga ‘08- Off Road
- Mazda 3 (BK) ‘03-’09 Saloon, Hatchback
- Mazda 5 (CR/CW) ‘05- MPV
- Volvo C30 ‘06- Hatchback
- Volvo C70 II ‘07- Cabrio
- Volvo S40 II ‘04-’12 Saloon
- Volvo V50 ‘04-’12 Estate

Fiesta Applications:
- Fiesta ‘95-’02
- KA ‘96-’08
- Puma ‘96-’02

Adaptors can be used in a press frame with either a 18704100 pressure screw (recommended) or a hydraulic ram

Kit includes adaptor set for Fiesta Bushes, for the removal and installation of trailing arm bushes
Fiesta Bush OEM reference numbers: 1011363, 1016439, 96FB5K653CA

Fiesta Applications:
- Fiesta ‘95-’02
- KA ‘96-’08
- Puma ‘96-’02

*Note - Adaptor Ring 18780400 required

Adaptors can be used in a press frame with either a 18704100 pressure screw (recommended) or a hydraulic ram

Kit includes adaptor set for Focus Bushes, for the removal and installation of trailing arm bushes
Focus Bush OEM reference numbers: 1 061 670, 1304124

Focus Applications:
- C-MAX ‘07- MPV
- MKI ‘98-’04 Estate, Hatchback, Saloon, Van
- MKII ‘04- Convertible, Hatchback, Saloon, Van
- Kuga ‘08- Off Road
- Mazda 3 (BK) ‘03-’09 Saloon, Hatchback
- Mazda 5 (CR/CW) ‘05- MPV
- Volvo C30 ‘06- Hatchback
- Volvo C70 II ‘07- Cabrio
- Volvo S40 II ‘04-’12 Saloon
- Volvo V50 ‘04-’12 Estate

*Note - Adaptor Ring 18780400 required

Certain vehicle models require model specific sets of press pieces due to the specific design of the vehicle components.
The Individual Press Piece set hasbeen developed for such circumstances, and should be used in conjunction with the Universal Press Frames (187000V2 / 18703500), Universal C Clamps (18780200 / 18780300) or the Universal Press & Pull Sleeve Set (08780000)

• For use on Outer Ball Joints
- Mercedes W211 (E Class 02 - 09)
- Mercedes W220 (S Class 98 - 06)
- Mercedes W230 (SL Class 02 - 09)
 

This set can be used in conjunction with either 18780200 - Universal C Clamp or with 18780300 Ball Joint C-Clamp when working off-the-vehicle – However, for on the vehicle usage, the Ball Joint C-Clamp 18780300 has been designed for this purpose.

• A new “on vehicle” solution for the removal and replacement of twin swivel ball joints as fitted onto the front axles of two popular Land Rover models: Discovery 2 1998 – 2004 & Range Rover P38A 1994 – 2002
• Uses the Sykes-Pickavant 187 Hydraulic Series press frame to deliver 12 tonnes of force, for a “take the press to the car” solution (Inc in 18771100 only)
• Designed, tested and manufactured in Great Britain
  
  Other kit options available - See related products 18771100 and 18771200

Land Rover Swivel Ball Joint Tool including Adaptors, Press Frame, Adaptor Ring & Ram

• A new “on vehicle” solution for the removal and replacement of twin swivel ball joints as fitted onto the front axles of two popular Land Rover models: Discovery 2 1998 – 2004 & Range Rover P38A 1994 – 2002
• Uses the Sykes-Pickavant 187 Hydraulic Series press frame to deliver 12 tonnes of force, for a “take the press to the car” solution
• Designed, tested and manufactured in Great Britain
  
  Other kit options available - See related products 18771000 and 18771200

Land Rover Swivel Ball Joint Kit - Adaptor Set including Press Frame & Adaptor Ring

• A new “on vehicle” solution for the removal and replacement of twin swivel ball joints as fitted onto the front axles of two popular Land Rover models: Discovery 2 1998 – 2004 & Range Rover P38A 1994 – 2002
• Uses the Sykes-Pickavant 187 Hydraulic Series press frame to deliver 12 tonnes of force, for a “take the press to the car” solution (Inc in 18771100 only)
• Designed, tested and manufactured in Great Britain
  
  Other kit options available - See related products 18771000 and 18771100

Sykes-Pickavant have developed a solution for the efficient removal and refitting of bushes on traditional Land Rover models

• For radius arm, panhard bushes and general suspension bushes
• Dedicated shaped press pieces for correct location and alignment
• Suitable for Land Rover Models: Defender, Discovery 1 & 2, Classic Range Rover, Range Rover P38A & older Series Land Rovers

Kit includes 6 Adaptor Pieces for use in a workshop press with suspension parts removed from vehicle

• New single piece stepped press frame plate
• Allows for many different sized press pieces to fit positively into the frame for precise work

Sykes-Pickavant have developed a solution for the efficient removal and refitting of bushes on traditional Land Rover models

• For radius arm, panhard bushes and general suspension bushes
• Dedicated shaped press pieces for correct location and alignment
• Suitable for Land Rover Models: Defender, Discovery 1 & 2, Classic Range Rover, Range Rover P38A & older Series Land Rovers

Kit includes 6 Piece Adaptor Set, 18775100 step plate, press frame, adaptor ring & 12 Tonne SP hydraulic ram

*Note - With certain large radius arm bushes, the adaptor pieces can still be used with a workshop press or C Clamp
 

Sykes-Pickavant have developed a solution for the efficient removal and refitting of bushes on traditional Land Rover models

• For radius arm, panhard bushes and general suspension bushes
• Dedicated shaped press pieces for correct location and alignment
• Suitable for Land Rover Models: Defender, Discovery 1 & 2, Classic Range Rover, Range Rover P38A & older Series Land Rovers

Kit includes 6 Piece Adaptor Set, 18775100 step plate, press frame & adaptor ring, for customers who already have an SP hydraulic ram

*Note - With certain large radius arm bushes, the adaptor pieces can still be used with a workshop press or C Clamp

Sykes-Pickavant have developed a solution for the efficient removal and refitting of bushes on traditional Land Rover models

• For radius arm, panhard bushes and general suspension bushes
• Dedicated shaped press pieces for correct location and alignment
• Suitable for Land Rover Models: Defender, Discovery 1 & 2, Classic Range Rover, Range Rover P38A & older Series Land Rovers

Kit includes 6 Piece Adaptor Set, 18775100 step plate & C Clamp for minimal vehicle strip-down

Land Rover Discovery 3 & 4 Suspension Bush Front Upper Kit

A comprehensive solution specifically designed for removal of seized / corroded bushes and installation of replacement bushes for Land Rover Discovery 3/4 and Range Rover Sport models

Available kits are as follows:
- Master Kit (18777000)
- Front lower (18777100)
- Front upper (18777200)
- Rear lower (18777300)
- Rear upper (18777400)

• Only the bushes have to be replaced, saving the cost and time in replacing the complete arm
• Lower arm bushes can be replaced on vehicle without having to remove the wheel
• Individual press frame pieces for each wishbone
• To be used in conjunction with the SP Universal Press Frame (18700100) and due to the nature of corroded components, the power of the SP 12 Tonne Hydraulic Ram is also required (18000000) (Can be purchased together as 187000V2 - Universal Press Frame c/w 12 Tonne Hydraulic Ram)
• The SP 90206000 Vibro Impact Air Hammer and SP 96020000 Induction Heater can be used to assist in the removal of corroded suspension bolts and bushes - See video below

Land Rover Discovery 3 & 4 Suspension Bush Rear Lower Kit

A comprehensive solution specifically designed for removal of seized / corroded bushes and installation of replacement bushes for Land Rover Discovery 3/4 and Range Rover Sport models

Available kits are as follows:
- Master Kit (18777000)
- Front lower (18777100)
- Front upper (18777200)
- Rear lower (18777300)
- Rear upper (18777400)

• Only the bushes have to be replaced, saving the cost and time in replacing the complete arm
• Lower arm bushes can be replaced on vehicle without having to remove the wheel
• Individual press frame pieces for each wishbone
• To be used in conjunction with the SP Universal Press Frame (18700100) and due to the nature of corroded components, the power of the SP 12 Tonne Hydraulic Ram is also required (18000000) (Can be purchased together as 187000V2 - Universal Press Frame c/w 12 Tonne Hydraulic Ram)
• The SP 90206000 Vibro Impact Air Hammer and SP 96020000 Induction Heater can be used to assist in the removal of corroded suspension bolts and bushes - See video below

Land Rover Discovery 3 & 4 Suspension Bush Rear Upper Kit

A comprehensive solution specifically designed for removal of seized / corroded bushes and installation of replacement bushes for Land Rover Discovery 3/4 and Range Rover Sport models

Available kits are as follows:
- Master Kit (18777000)
- Front lower (18777100)
- Front upper (18777200)
- Rear lower (18777300)
- Rear upper (18777400)

• Only the bushes have to be replaced, saving the cost and time in replacing the complete arm
• Lower arm bushes can be replaced on vehicle without having to remove the wheel
• Individual press frame pieces for each wishbone
• To be used in conjunction with the SP Universal Press Frame (18700100) and due to the nature of corroded components, the power of the SP 12 Tonne Hydraulic Ram is also required (18000000) (Can be purchased together as 187000V2 - Universal Press Frame c/w 12 Tonne Hydraulic Ram)
• The SP 90206000 Vibro Impact Air Hammer and SP 96020000 Induction Heater can be used to assist in the removal of corroded suspension bolts and bushes - See video below

• Universal clamps for the dismantling and installation of suspension parts on the vehicle

• Specially designed Universal Clamps for use with the ‘0878’ / ‘0879’ Series Press & Pull Sleeve Kits

• Designed to allow greater access in restricted situations and where the Universal Press Frame is not suitable

• Special ‘trapezoidal’ threaded screw, allows for the application of greater force and can be used with Impact Air Wrenches, as well as standard ratchets / wrenches etc. Also capable of accepting the SP1500 or SP1800 Hydraulic Rams.

UNIVERSAL C CLAMP - Internal frame dimensions: 245mm x 70mm

• Ring sits in press frame to hold adaptors in place

A universal system for the removal and installation of Suspension Bushes, Bearings, Seals etc

By selecting the appropriate diameter sleeves, the bush / bearing / seal is ‘Pressed’, or ‘Pulled’ by the action of turning the spindle nuts in opposing directions. Fully universal applications for Cars, LCV’s HGV’s etc, with a range of kit options to suit individual requirements.

Press & Pull Sleeve Kits can be used in the following formats:

• As a stand alone set of tools

• With a standard workshop press

• With a Universal Press Frame (187000V2 or 18703500)

• With a Universal C Clamp (18780200 or 18780300)

• Can also be used with selected model specific Press Piece sets and in conjunction with optional hydraulic upgrade kits

All components are available individually as spare parts

• When used in conjunction with components from 08780000, or 08797500, these kits allow application of up to 12 tons of hydraulic force which can be used to provide a controlled force in place of the manual or mechanical effort required when using 08780000 / 08797500

• Contents:

- Hollow Ram Hydraulic Cylinder, Alignment washer and 2x extra-long heavy-duty spindles that are rated for use with the hydraulic ram. (Note: Standard 08780000 spindles are not rated for use with the 18782500 and / or 18792500 hydraulic ram)

• Cylinder: 8mm stroke

• When used in conjunction with components from 08780000, or 08797500, these kits allow application of up to 12 tons of hydraulic force which can be used to provide a controlled force in place of the manual or mechanical effort required when using 08780000 / 08797500

• Contents:

- Hollow Ram Hydraulic Cylinder, Alignment washer and 2x extra-long heavy-duty spindles that are rated for use with the hydraulic ram. (Note: Standard 08780000 spindles are not rated for use with the 18782500 and / or 18792500 hydraulic ram)

• Cylinder: 40mm stroke

• Specification:
- Length: 195mm
- Jaw Throat Width: 15mm
- Jaw Throat Depth: 69mm

• Removal of decals, graphics, stripes, emblems and body mouldings etc
• Softens the adhesive to make removal simple & effective

• Highly adaptable coil allows user to shape to suit
• Use three / four windings of coil for maximum performance