Manufactured from high-density polyethylene with UV stabilizer resistant to most chemicals and solvents.
The black drain pan is used to collect oils; the green to collect water-based fluids to prevent cross contamination.
Anti-splash lip, large handles and enclosed spout helps reduce spillages.
Diameter 450mm.
Sold loose.
Spring Dividers
Hand Tools > Measuring > Measuring
34196
Brand::DRAPER
150mm Spring Dividers
Fine ground with adjustment by knurled wheel.
Capacity 150mm
Display packed.
MAGNETIC BASE C/W FINE ADJUST.
Hand Tools > Measuring > Measuring
45277
Brand::Draper
MB-LDFAB
Long metric thickness gauges
Hand Tools > Measuring > Measuring
804.L
- Set of 19 feeler gauges (round tip): 4/100 --> 25/100 mm.
- Blade length: 150 mm.
Inch thickness gauges
Hand Tools > Measuring > Measuring
804.U
- Set of 26 feeler gauges (tapered tip): 15/10000 --> 250/10000 inches.
- Blade length: 3 "1/2 (88.9 mm).
806 - Micrometers 1/100th mm accuracy
Hand Tools > Measuring > Measuring
806.C25
- Accuracy: 1/100th - 0.01 mm.
- Accuracy: 0.01 mm.
- Carbide plunger tip: - 6.5 mm.
- Ratchet drum with torque limiter.
- Force applied on the part included strictly between 5 and 10 Nm.
- Drum: - 18 mm.
- Drum with 50 divisions (one drum turn: 0.5 mm).
- Isothermal pads.
- Supplied with:
- Pin and hook calibration wrench.
- Calibration shim wrench from model 806C.50.
- Calibration shims:
- 806.C50: 25 mm - 1.5 -m.
- 806.C75: 50 mm - 2 -m.
- 806.C100: 75 mm - 2.5 -m.
- Supplied in plastic case.
- Supplied with compliance certificate.
8 LITRE MEASURING JUG
Hand Tools > Measuring > Measuring
83999
Brand::DRAPER
Resistant to diesel/petrol, oils and most acids.
Flexible spout with carrying handle and screw top lid.
Metric and US imperial graduations on jug body.
Sold loose.
Capacity: 8L
- Metal container with chalk line locking by folding the crank.
- Chalk line reel: - 1.5 mm.
LASER TACHOMETER DT2234C
Hand Tools > Measuring > Measuring
DT2234C
This mini laser tachometer is just 13cm
long x 6cm wide and includes a handy carry
case and plenty of reflective tape strips. A
vital addition to any tool kit.
Display:5 Digits, 18MM (0.7”)
Test Range:2.5 to 99,999RPM
Resolutions:0.1 RPM(2.5 to 999.9 RPM),
1 RPM (over 1,000 RPM
Accuracy:±(0.05% + 1 Digit)
Sampling Time:0.8 Seconds
(over 60 RPM)
3INCH FEELER GAUGE
Hand Tools > Measuring > Measuring
ET156
Precision made, dual calibrated measuring blades of fine quality steel - hardened, tempered and polished for long term accuracy.
•26 leaves from 0.0015" (0.038mm) to 0.025" (0.635mm)
•Locking screws holds one or more blades in position whilst in use.
METRIC SCREW PITCH GAUGE
Hand Tools > Measuring > Measuring
ET157
Engineers tool to accurately measure internal and external thread forms.
•24 blades each clearly indexed
•Enclosed in a steel case
Laser Thermometer
Hand Tools > Measuring >
IRT001
• Temp. range: -50 to 380°C (-58 to 716°F).
• Optical resolution: D:S=13:1.
• Built-in laser pointer.
• Over Range indication.
• Backlit LCD display.
• Fixed at 0.95 Emissivity.
• Data Hold.
• Auto power off.
• Min/max temperature memory.
10KM METRIC MEASURING WHEEL
Hand Tools > Measuring > Measuring
JEFDMWHL
Compact, easily folded and carried.
Lightweight durable design.
Illuminated measuring dial.
Instant zero reset.
Smooth running rubber wheel.
Forward and reverse distance measuring.
Measures to (by cm): 9999.9m
Weight: 1.3kg.
5m Measuring Tape
Hand Tools > Measuring > Measuring
JEFTM050DB
Plastic body measuring tape with soft rubber grip for greater comfort, superior grip and ease of use
Auto return mechanism
Blade is marked with metric and inch graduations
8m Measuring Tape Nylon Coated
Hand Tools > Measuring > Measuring
JEFTM080NC
Nylon coated matt finish blade for abrasion resistance
Soft grip for comfortable use
Extra thick bade material for superior life
Auto blade stop/release for ease of use
Blade is marked with metric and inch graduations
Magnetic tip
5M Measuring Tape
Hand Tools > Measuring >
MT05M
Brand::Norse
19mm wide measuring tape
5m long
Magnetic hook
COMBINATION SQUARE (300MM/12 INCH)
Hand Tools > Measuring > Measuring
TLS0300
COMBINATION SQUARE (300MM/12 INCH)
6" Steel Engineering Square
Hand Tools > Measuring > Measuring
JEFSQ6
6- Steel Engineering Square
Hardened and tempered blades
Ground for straightness and accuracy
9" Steel Engineering Square
Hand Tools > Measuring > Measuring
JEFSQ9
9- Steel Engineering Square
Hardened and tempered blades
Ground for straightness and accuracy
5m Measuring Tape Nylon Coated
Hand Tools > Measuring > Measuring
JEFTM050NC
Nylon coated matt finish blade for abrasion resistance
Soft grip for comfortable use
Extra thick bade material for superior life
Auto blade stop/release for ease of use
Blade is marked with metric and inch graduations
Magnetic tip
50M MEASURE TAPE - FIBREGLASS
Hand Tools > Measuring > Measuring
JEFTM500FG
Plastic body measuring tape with soft rubber grip.
Complete with heavy duty steel blade for added stability.
Marked with metric and
inch graduations.
Tape width: 13mm.
50M MEASURE TAPE - STEEL
Hand Tools > Measuring > Measuring
JEFTM500ST
Blade length: 50m.
Blade width: 12.5mm.
Complete with rubber hanging strap and fold away winding handle.
Steel Blade
Foldable Funnel
Hand Tools > Measuring > Measuring
04954
Brand::DRAPER
Malleable funnel made from flexible aluminium with a nitrile rubber coating. Designed to be easily cleaned by most common degreasers or cleaners. Bends and forms to create a leak-proof channel for draining or filling, eliminating the use of cardboard, plastic jugs and other messy solutions, while preventing oils/fluids accidentally spilling onto the engine, gearbox and neighbouring parts.
Perfect for small engine repair, servicing, automotive work, changing the oil in air compressors, draining and pouring fluids or granular material, creating all kinds of funnels and making improvised pans.
Retains shape and can be used time and time again, whilst being resistant to antifreeze, petrol, diesel, transmission oil, engine oil and brake fluid etc.
1200 - Cast iron surface plates
Hand Tools > Measuring > Measuring
- Class II.
Digital display depth gauge 300 mm - 1/100th
Hand Tools > Measuring > Measuring
1350
- Accuracy: 1/100th - 0.01 mm.
- Repeatability: 10 -m.
- Protection rating IP 65:
- IP 6: full dust protection.
- IP 5: fluid spray protection.
- Rectified stainless steel mechanical assembly.
- Reading rule with patented induction system.
- LCD digital display 6 mm.
- Floating zero.
- Metric / imperial conversion.
- Compatible with Gagewedge software RS232 output.
- Automatic power off.
- Operating time: about 3500 hours.
- Supplied in case with compliance certificate.
Digital display dial gauge
Hand Tools > Measuring > Measuring
1365
- Accuracy: 0.001 mm.
- Measurement range: 0 - 12.5 mm.
- Metric / imperial conversion.
- Protection rating IP 51.
- LCD display 6 mm.
- Fastening bush (- 8 mm).
- Interchangeable plunger tip (M2.5).
- Display pivots through 270-.
- Floating zero.
- Change of origin for any tip position.
- Measurement possible with two different references.
- Measurement save (frozen display).
- Compatibility with Gagewedge software RS232 output.
- Supplied with FACOM compliance certificate.
Length: 8 m
Shock-resistant bimaterial ABS casing
Steel Tape
Precision class: II
LASER DISTANT GUAGE 20 MT
Hand Tools > Measuring >
1693_20
Laser distance meter, 20 m
​​MEASUREMENTS:
• single distance measurement
• continuous measurement or minimal measurement
Auto off feature
​​TECHNICAL DATA
Measurement range: 0.05 ÷ 20m (0.2in ÷ 66f)
Scale selection: m, in, ft
Measurement accuracy: ±1.5 mm (± 0.06 in)
Laser class: 2
Battery life: AAA 2 x 1.5V
1705-CHALK LINE REEL MADE FROM ALUMINIUM
Hand Tools > Measuring > Measuring
1705
Chalk line reel made from aluminium
1705 PT/250-CHALK POWDER
Hand Tools > Measuring > Measuring
1705/PT/250
Chalk powder
DIGITAL MULTIMETRES OSCILLOSCOPE
Hand Tools > Measuring >
1760DGT_2
Digital automotive multimeter, portable, with 2-channel oscilloscope and waveform generator
Includes a 2-channel oscilloscope!
KIT CONTENTS:
- multimeter tips
- 2 BNC crocodile clips for oscilloscope
- tip probe for oscilloscope (1X and 10X)
- battery charger
- nylon sheath
TECHNICAL DATA
Display: 2.8 colour TFT
Resolution: 320 x 240 pixels
Power supply: 100V-240V AC, 50Hz-60Hz; DC INPUT 5V DC-2A
Battery: 2 x 2600 mAh
MULTIMETER SPECIFICATIONS
Test: Voltage, Current, Resistance, Capacity, Diodes and On-Off
Max. voltage: 600V DC
Max. current: 10A DC
Max. resistance: 40MOHM
Max. capacity: 100uF
OSCILLOSCOPE SPECIFICATIONS
Horizontal
Bandwidth: 40MHz
Sampling frequency range: 250MSa/s (single channel) - 125MSa/s (double channel)
SEC/DIV range: 5ns/div ÷ 500s/div 1,2,5 sequence
Vertical
VOLTS/DIV range: 10mV/div÷10V/divat BNC input
Selectable analogue, bandwidth limit, typical: 20MHz
Low frequency response (-3db): ≤10Hz a BNC
DC Gain Accuracy: ± 3% for Normal or Medium acquisition mode, 10V/div ÷ 10 mV/div
Trigger
Type: Edge
Mode: Auto, Normal, Single
Slope: Rising, Falling, Rising, & Falling
Source: CH1, CH2
Input
Coupling: DC, AC or GND
Supported probe attenuation factors: 1X, 10X, 100X, 1000X
Arbitrary waveform generator
Waveform frequency: Sine (1Hz÷25MHz), Square (1Hz÷10MHz), Ramp (1Hz÷MHz), EXP (1Hz÷5MHz)
Width: 2.5Vpp (50Ω) - 5Vpp (high impedance)
Output impedance: 50Ω
Dimensions: 199 x 98 x 40 mm
Weight: 624g
16L Fluid Pan - Green
Hand Tools > Measuring > Measuring
23259
Brand::DRAPER
Manufactured from high-density polyethylene with UV stabilizer resistant to most chemicals and solvents.
The black drain pan is used to collect oils; the green to collect water-based fluids to prevent cross contamination.
Anti-splash lip, large handles and enclosed spout helps reduce spillages.
Diameter 450mm.
Sold loose.
3 Litre Funnel
Hand Tools > Measuring > Measuring
24771
Brand::DRAPER
Translucent polypropylene with dust cover, anti-spill/splash lip and wire mesh filter in base to prevent the ingress of foreign matter.
Barrel connector only supplied with 230mm/3L funnel.
Sold loose.
1.7 Litre Funnel
Hand Tools > Measuring > Measuring
24774
Brand::DRAPER
Translucent polypropylene with dust cover, anti-spill/splash lip and wire mesh filter in base to prevent the ingress of foreign matter.
Sold loose.
3067 - High accuracy straight levels
Hand Tools > Measuring > Measuring
3067.2
- Stabilised cast iron levels.
- Accuracy: 0.04 mm/m.
- Sides with anti-slip insulating pads.
- Vials protected by colourless plexiglas.
- Prismatique base with 140- Vee.
- Liquid: ether.
- supplied in wood case with compliance certificate.
307BM - Magnetic trapezoidal levels
Hand Tools > Measuring > Measuring
- In reverse position accuracy 0.75 mm/m.
- Massive light alloy body pressure moulded.
- Electrostatic powder protective coating.
311B - Magnetic levels 1 machined sole plate
Hand Tools > Measuring > Measuring
311B.60
- In reverse position accuracy 0.5 mm/m.
- Fitted with a vertical vial horizontal vial and a declivity vial.
Outside Spring Callipers
Hand Tools > Measuring > Measuring
34237
Brand::DRAPER
150mm Outside Spring Calipers
Fine ground with adjustment by knurled wheel.
Capacity 150mm
Display packed.
357 F3-THREE-VIAL SPIRIT LEVEL
Hand Tools > Measuring > Measuring
357F3
Three-vial spirit level
357 R/F3-SPARE VIALS FOR ITEM 357 F3
Hand Tools > Measuring > Measuring
357R_F3
Spare vials for item 357 F3 pair
Inside Spring Callipers
Hand Tools > Measuring > Measuring
39451
Brand::DRAPER
150mm Inside Spring Calipers
Fine ground with adjustment by knurled wheel.
Display packed.
4Pce Plastic Funnel Set
Hand Tools > Measuring > Measuring
43853
Brand::DRAPER
Four different sized tough plastic funnels.
50, 75, 100 and 115mm diameter
Magnetic Stand
Hand Tools > Measuring > Measuring
45276
Brand::DRAPER
Magnetic Stand Base
For use with dial gauges, etc.
Powerful magnetic base with on/off switch.
Precision ground surface.
Display carton.
DIGITAL MICROMETER 0-25MM
Hand Tools > Measuring > Measuring
46599
Brand::Draper
DEM
METRIC DIAL TEST KIT
Hand Tools > Measuring > Measuring
46609
Brand::DRAPER
• Dial test indicators accuracy 0.01mm.
• Kit contains:
Metric dial test indicator (0-25mm) with plunger.
Metric dial test indicator (0-1.5mm) with stylus.
Magnetic stand with fine adjustment. 22 interchangeable tips for dial test indicator with plunger.
6mm and 8mm stylus for dial test indicator clamp.
Metric Screwpitch Gauge
Hand Tools > Measuring > Measuring
51070
Brand::DRAPER
Folding leaves, individually stamped with accurately formed thread profiles.
Folding leaves, individually stamped with accurately formed thread profiles.
American National Thread UNC-UNF, in the range 4-62TPI.
Sold loose.
BSW Screwpitch Gauge
Hand Tools > Measuring > Measuring
51072
Brand::DRAPER
Folding leaves, individually stamped with accurately formed thread profiles.
Ranges 4-62BSW and 0.25-6.0mm.
Sold loose.
DIAL GAUGE 0-10MM
Hand Tools > Measuring > Measuring
51830
Brand::Draper
PDG010M
DIAL TEST INDICATOR - IMPERIAL
Hand Tools > Measuring > Measuring
51831
Brand::DRAPER
Draper 51831
Dial Test Indicator metric scale with a range of 0 to 0.1 mm and graduated 0.005
6Pce Telescopic Gauge Set
Hand Tools > Measuring > Measuring
52416
Brand::DRAPER
The spring-loaded plunger expands within the hole. Knurled locking screw allows plunger contacts to be held in position, removed and measured with a micrometer. Satin chrome finish.
Supplied in PVC storage wallet with ranges marked.
- Model without graduation.
- Fine adjustment by pivot strip using a push screw.
- Cast iron base.
- Vertical face with 90- V groove.
- Rod: - 10 mm.
Weight: 1.745 kg.
Precision surface gauge 300 mm - 1/50th
Hand Tools > Measuring > Measuring
796B
- Class 0.
- Precision 1/50th - 0.02 mm.
- Accuracy error: - 28-m.
- Reliability error: - 12-m.
- Stainless steel rule - mat anti-reflection finish:
- Width: 25 mm.
- Hardness 40 HRc minimum.
- Maximum measurement capacity: 300 mm.
- Steel alloy scriber:
- Hardness 53 HRc minimum.
- Better scribing quality.
- 796B.04: serial no. A02 0001 --> march 01.
- 796C.04: serial no. A02 0001 --> A04 0001.
- Fine adjustment by return screw.
- Repositionable magnifying glass.
- Dial gauge base supplied in standard: for dial gauge with - 8 mm rod (DIN 878 standard).
- Total dimensions: 455 mm x 90 mm.
- Supplied with compliance certificate.
Weight: 3.280 kg.
800A.216 Stainless body 2M tape measures
Hand Tools > Measuring > Measuring
800A.216
Compact.
Tape with 2 rivets.
Width: 16 mm.
Length: 2M
Rigidity up to 1.10 m.
Replaces both the 800A and 801A Measuring Tapes
Round tip metric thickness gauges
Hand Tools > Measuring > Measuring
804
Set of 19 feeler gauges (round tip): 4/100 100/100 mm.
Blade length: 90 mm.
Weight: 60 g.
Anti-magnetic metric thickness gauges
Hand Tools > Measuring > Measuring
804.AM
- Set of 19 feeler gauges (tapered tip): 10/100 --> 100/100 mm.
- Blade length: 100 mm.
- Brass blades.
Sharp tip metric thickness gauges
Hand Tools > Measuring > Measuring
804.P
- Set of 19 feeler gauges (tapered tip): 4/100 --> 100/100 mm.
- Blade length: 90 mm.
19 Blade 250mm Long Feeler Guage Set
Hand Tools > Measuring > Measuring
804.SL
Facom Tools Metric Long Round Tip Thickness Feeler Gauges - 804.SL
805 - Universal calipers class 0 - 1/50th
Hand Tools > Measuring > Measuring
805.1
- Accuracy: 1/50th - 0.02 mm.
- Interior exterior depth measurement.
- Stainless steel rule - mat finish.
- Rule hardness: 40 HRc minimum.
- Flat depth gauge.
- Vernier with guide for better thumb position.
- Vernier endurance: 20 000 cycles minimum.
- Vernier screw locking.
- Supplied in case with compliance certificate.
805 - Universal calipers class 0 - 1/50th
Hand Tools > Measuring > Measuring
805.2
- Accuracy: 1/50th - 0.02 mm.
- Interior exterior depth measurement.
- Stainless steel rule - mat finish.
- Rule hardness: 40 HRc minimum.
- Flat depth gauge.
- Vernier with guide for better thumb position.
- Vernier endurance: 20 000 cycles minimum.
- Vernier screw locking.
- Supplied in case with compliance certificate.
Caliper class 0 - 1/50th
Hand Tools > Measuring > Measuring
805.M
- Accuracy: 1/50th - 0.02 mm.
- Measurement capacity: 200 mm.
- Interior exterior measurement (bore exceeding 10 mm).
- Stainless steel rule - mat finish.
- Rule hardness: 40 HRc minimum.
- Vernier with guide for better thumb position.
- Vernier endurance: 20 000 cycles minimum.
- Vernier screw locking.
- Graduations resistant to chemicals.
- Perfect contrast guaranteeing optimum reading quality.
- Supplied in case with compliance certificate.
Universal caliper - 300 mm - 1/50th
Hand Tools > Measuring > Measuring
805.S
- Accuracy: 1/50th - 0.02 mm.
- Measurement capacity: 300 mm.
- Interior exterior measurement (bore exceeding 10 mm).
- Stainless steel rule - mat finish.
- Rule hardness: 40 HRc minimum.
- Vernier with guide for better thumb position.
- Vernier endurance: 20 000 cycles minimum.
- Vernier screw locking.
- Precision adjustment screw.
- Supplied in case with compliance certificate.
Exterior friction micrometer 1/100th mm accuracy
Hand Tools > Measuring > Measuring
806.F
- Accuracy: 1/100th - 0.01 mm.
- Accuracy: 0.01 mm.
- Carbide plunger tip: - 6.5 mm.
- Ratchet drum with torque limiter.
- Force applied on the part included strictly between 5 and 10 N.m.
- Drum = - 18 mm.
- Plunger tip lock.
- Supplied in plastic case.
- Supplied with compliance certificate.
806 - Micrometers 1/100th mm accuracy
Hand Tools > Measuring > Measuring
- Accuracy: 1/100th - 0.01 mm.
- Accuracy: 0.01 mm.
- Carbide plunger tip: - 6.5 mm.
- Ratchet drum with torque limiter.
- Force applied on the part included strictly between 5 and 10 Nm.
- Drum: - 18 mm.
- Drum with 50 divisions (one drum turn: 0.5 mm).
- Isothermal pads.
- Supplied with:
- Pin and hook calibration wrench.
- Calibration shim wrench from model 806C.50.
- Calibration shims:
- 806.C50: 25 mm - 1.5 -m.
- 806.C75: 50 mm - 2 -m.
- 806.C100: 75 mm - 2.5 -m.
- Supplied in plastic case.
- Supplied with compliance certificate.
Exterior micrometer with extension 1/100th mm accuracy
Hand Tools > Measuring > Measuring
807C
- Accuracy: 1/100th - 0.01 mm.
- Reading range 0 to 150 mm.
- Accuracy: 0.01 mm.
- Ratchet drum with torque limiter.
- Force applied on the part included strictly between 5 and 10 N.m.
- Drum: - 18 mm.
- Carbide plunger tip: - 6.5 mm.
- Interchangeable fixed plunger tip.
- Supplied with a set of 5 extensions.
- Supplied with the 5 calibration shims.
- Calibration shims:
- 807.CALE25: 25 mm - 1.5 -m.
- 807.CALE50: 50 mm - 2 -m.
- 807.CALE75: 75 mm - 2.5 -m.
- 807.CALE100: 100 mm - 3 -m.
- 807.CALE125: 125 mm - 3.5 -m.
- Isothermal pads.
- Plunger tip lock.
- Supplied in wood case.
- Supplied with compliance certificate.
300MM Digital Callipers
Hand Tools > Measuring > Me
80844
Brand::DRAPER
The extra large display provides metric and imperial reading in 0.01mm and 0.005 graduations.
Each caliper has an auto power off feature enabling greater battery life.
Supplied with an SR44 battery.
809 - Stainless steel filament rules
Hand Tools > Measuring > Measuring
809.75
- To check a surface or an edge.
- Tempered stainless steel with insulating handle.
- Supplied in wallet.
Non graduated solid stainless steel rule
Hand Tools > Measuring > Measuring
809.IN500
- Class I flatness: 4 + L/60 -m (L being the length in mm).
- Stainless steel.
- Supplied in wood case.
Graduated solid stainless steel rule
Hand Tools > Measuring > Measuring
809.ING500
- Class I flatness: 4 + L/60 -m (L being the length in mm).
- With offset zero graduation.
- Supplied in wood case.
809 - Stainless steel filament rules
Hand Tools > Measuring > Measuring
- To check a surface or an edge.
- Tempered stainless steel with insulating handle.
- Supplied in wallet.
Metrology-control case 8 tools
Hand Tools > Measuring > Measuring
809.J2
Including:
- 805.M: caliper to 1/50 mm (capacity: 200 mm).
- 803.300M: stainless rule 300 mm.
- 811: depth gauge 1/50 mm (capacity: 160 mm) fine adjustment by return screw.
- 818B.15: simple square 150 mm (accuracy class: 1).
- 236: carbide scriber.
- 256.4: punch.
- 806.C25: micrometer 1/100 mm (capacity: 25 mm).
- 1901.05: straight scriber (capacity: 150 mm).
- Supplied in case (L. x D. x H.): 365 x 260 x 30 mm.
Weight: 2.100 kg.
Metrology-control case 10 tools
Hand Tools > Measuring > Measuring
809.J3
Including:
- 805.M: caliper 1/50 mm (capacity 200 mm).
- 806.C25: micrometer 1/100 mm (capacity: 25 mm).
- 806C.50: micrometer 1/100 mm (capacity: 25 - 50 mm).
- 811: depth gauge 1/50 mm (capacity: 160 mm) fine adjustment by return screw.
- 818B.15: simple square 150 mm (accuracy class 1).
- 819B.15: flanged square 150 mm (accuracy class 1).
- 1901.05: straight scriber 150 mm.
- 236: carbide scriber.
- 803.300M: stainless rule 300 mm.
- 256.4: punch.
- Supplied in case (L. x D. x H.): 410 x 280 x 40 mm.
Weight: 3.560 kg.
811 - Depth gauges class 0 - 1/50th
Hand Tools > Measuring > Measuring
811B
- Accuracy: 1/50th - 0.02 mm.
- Stainless steel rule - mat finish.
- Rule hardness: 40 HRc minimum.
- Measurement surface hardness: 53 HRc minimum.
- Vernier with guide for better thumb position.
- Vernier endurance: 20 000 cycles minimum.
- Vernier locking by precision adjustment screw.
- Supplied in case with compliance certificate.
811 - Depth gauges class 0 - 1/50th
Hand Tools > Measuring > Measuring
811C.250
- Accuracy: 1/50th - 0.02 mm.
- Stainless steel rule - mat finish.
- Rule hardness: 40 HRc minimum.
- Measurement surface hardness: 53 HRc minimum.
- Vernier with guide for better thumb position.
- Vernier endurance: 20 000 cycles minimum.
- Vernier locking by precision adjustment screw.
- Supplied in case with compliance certificate.
Dial gauge-hinged magnetic base set
Hand Tools > Measuring > Measuring
812.3
- Radius of action: 280 mm.
- Vertical tear strength: 600 N (60 kg).
- Threading -: M8.
- Base: 50 x 55 x 60 mm.
Weight: 1.900 kg.
Dial gauge-magnetic base set
Hand Tools > Measuring > Measuring
812A
- Dial gauge 812B.AC supplied with the hinged magnetic holder 812.3.
Weight: 2.245 kg.
Dial gauge 1/100th mm accuracy
Hand Tools > Measuring > Measuring
812B.AC
- Accuracy: 1/100th - 0.01 mm.
- Travel 10 mm saved with totaller.
- Pivot dial: - 57 mm.
- Interchangeable plunger tip.
Weight: 345 g.
812B.1AC: Steel ball plunger for 812B.AC dial gauge
High precision bevel protractor
Hand Tools > Measuring > Measuring
813B.S
- Tempered stainless steel bevel protractor.
- Anti-reflection mat chrome reading surface.
- Measurement range 0 - 360-.
- Minimum reading: 5- arc on vernier.
- Dial diameter: 70 mm.
- Dimensions (L. x D. x H.): 315 x 75 x 20 mm.
- Dial pivots with vernier and dial locking screw.
- 2 End rules cut at 45- and 60- including:
- 1 short rule 200 mm x 16 mm.
- 1 long rule 300 mm x 16 mm.
- Rule offset by 85 mm x 16 mm.
- Slide rules locking screw.
- Magnifying glass.
- Cast iron base: 70 mm x 30 mm.
- Supplied in rigid case dimensions (L. x D. x H.): 325 x 125 x 47 mm.
Weight: 1.466 kg.
Universal caliper - 150mm - 1/20th
Hand Tools > Measuring > Measuring
816
- Accuracy: 1/20th - 0.05 mm.
- Interior exterior depth measurement.
- Stainless steel rule - mat finish.
- Rule hardness: 40 HRc minimum.
- Flat depth gauge.
- Vernier with guide for better thumb position.
- Vernier endurance: 20 000 cycles minimum.
- Vernier screw locking.
- Supplied in case with compliance certificate.
817 - Dummy squares
Hand Tools > Measuring > Measuring
- Surface and edges in ground steel.
818.CLO - Stainless steel basic precision squares - Class 0
Hand Tools > Measuring > Measuring
- Accuracy: - 5 + h/50 -m (h being height in mm).
- Stainless steel.
- Ground exterior edges and flat surfaces.
818B - Basic squares - Class I
Hand Tools > Measuring > Measuring
- Ground sides and chamfers.
- XC12 steel.
819.CLO - Stainless steel flanged precision squares - Class 0
Hand Tools > Measuring > Measuring
- Accuracy: - 5 + h/50 -m (h being height in mm).
- Stainless steel.
- Ground exterior edges and flat surfaces.
819B - Basic flanged squares - Class I
Hand Tools > Measuring > Measuring
- Ground sides and chamfers.
- Screwed flange.
- XC12 steel.
- Supplied with compliance certificate.
DELA.1021 - Stainless steel rules - 1 side
Hand Tools > Measuring > Measuring
- Engraved on one side.
- One edge in mm - One edge in 1/2 mm.
- Stainless steel 18 % Cr - 8 % Ni.
- Anti-reflection treatment.
- Class II as per regulations applies to rules with a length above or equal to 500 mm.
DELA.1207-1208 - Dummy squares and dummy sliding squares
- Stainless steel blade divided in recto-verso protected by a sleeve.
- Anti-reflection.
- Deep engravings.
- Anodised aluminium heel.
DELA.1256 - Basic squares - Class II
Hand Tools > Measuring > Measuring
- Basic 90- squares.
DELA.1257 - Basic flanged squares - Class II
Hand Tools > Measuring > Measuring
- Screwed flange.
- Perfect bearing of heel and side.
DELA.1272 - Flanged double tab squares
Hand Tools > Measuring > Measuring
- Angles 30- 45- 60- 90-.
Flanged square 45?
Hand Tools > Measuring > Measuring
DELA.1292.00
Radius gauges
Hand Tools > Measuring > Measuring
DELA.1786.00
- To check the radii of fillets and connections.
- Tempered steel blades.
- 3 models for concave and convex radii 1 to 25 mm.
Radius gauges
Hand Tools > Measuring > Measuring
DELA.1787.00
- To check the radii of fillets and connections.
- Tempered steel blades.
- 3 models for concave and convex radii 1 to 25 mm.
Radius gauges
Hand Tools > Measuring > Measuring
DELA.1790.00
- To check the radii of fillets and connections.
- Tempered steel blades.
- 3 models for concave and convex radii 1 to 25 mm.
Simplified bevel protractor
Hand Tools > Measuring > Measuring
DELA.1897.02
- Stainless steel model without square.
- Accuracy: 5 mn arc.
- Length: 300 mm.
- Supplied in case (L. x D. x H.): 370 x 145 x 35 mm.
Weight: 400 g.
Two-vial level
Hand Tools > Measuring > Measuring
DELA.3151.01
- Accuracy: 0.4 mm/m.
- Dressed steel with grooves for cylindrical surfaces.
- Adjustable and protected longitudinal vial.
DELA.3180 - Round laid levels
Hand Tools > Measuring > Measuring
DELA.3180.03
- Spherical vial levels.
- Checking horizontal surfaces along two axes.
- Nickel-plated brass.
Plumb-bob
Hand Tools > Measuring > Measuring
DELA.3224.00
- Engineers plumb-bob.
- Diameter: 16 mm.
- Supplied with 4 m - 2 mm line.
Weight: 125 g.
DELA.13298 - Chalk line reels plum-bob
Hand Tools > Measuring > Measuring
DELA.3298.15
- Metal container with chalk line locking by folding the crank.
- Chalk line reel: - 1.5 mm.
Natural Brian?on chalk sticks
Hand Tools > Measuring > Measuring
DELA.3310.00
- Natural cut greasy chalk for marking on metal.
- Cross-section: 10 x 10 mm.
- Length: 100 mm.
- Colour: white.
- Box of 50 units.
Weight: 1.300 kg.
Grodel chalk line reel
Hand Tools > Measuring > Measuring
DELA.3400.00
- Builders carcass and public works.
- High strength synthetic body with folding crank.
- High capacity container.
- Chalk line reel: - 3 mm.
- Length: 30 m.
Weight: 500 g.
Blue talcum powder
Hand Tools > Measuring > Measuring
DELA.3402.00
Blue talcum powder
Hand Tools > Measuring > Measuring
DELA.3404.00
Synthetic blade rule Class III 2 meters - 10 branches
Hand Tools > Measuring > Measuring
DELA.401.00
- Recto verso graduatrion on the 2 edges in mm.
- Clicked branches 90- or 180-.
- Washable.
- Width: 16 mm.
Weight: 105 g.
Duralumin blade rules Class III 1 meter - 5 branches
Hand Tools > Measuring > Measuring
DELA.625.00
- Deep chemical engraving.
- Recto verso marking in mm.
- Brass springs.
- Satin surface.
- Width: 15 mm.
Weight: 92 g.
Duralumin blade rules Class III 2 meters - 10 branches
Hand Tools > Measuring > Measuring
DELA.626.00
- Deep chemical engraving.
- Recto verso marking in mm.
- Brass springs.
- Satin surface.
- Width: 15 mm.
Weight: 162 g.
CALIPER 1/20
Hand Tools > Measuring > Measuring
E140601
DIN 862
- Accuracy 1/20th - 0.05 mm.
- Measurement capacity: 150 mm.
- Interior. exterior and depth measurement.
- Supplied in protection cover with compliance certifi cate.
STAINLESS STEEL RULE 200MM
Hand Tools > Measuring > Measuring
E140801
FLEXIBLE RULE - 200 MM
- Engraved on both sides.
- mm and 1/2mm on each side.
Can be used as a modular system in storage drawers
Weight 1.513Kg
Technical Conformity
Professional Tools with Britool Expert Lifetime Warranty
YTSCC-7274-2015-08
Where applicable ISO + DIN + ASME ratings apply to Britool Expert Tools
12" Steel Engineering Square
Hand Tools > Measuring > Measuring
JEFSQ12
12- Steel Engineering Square
Hardened and tempered blades
Ground for straightness and accuracy
STAINLESS STEEL RULERS
Hand Tools > Measuring > Measuring
S/STEEL RULERS
Combintation Try Square
Hand Tools > Measuring > Measuring
CHT625
Heavy duty versatile tool for measuring and marking. Made from aluminium with a stainless steel rule. Includes inside & outside try square, mitre square & 180° protractor with centre finder of circular objects and depth gauge.
- Built-in vertical & horizontal spirit levels and scribe
- Etched metric & imperial markings
Digital Laser Tachometer
Hand Tools > Measuring > Measuring
CLARKECT1
The CT1 hand held digital laser tachometer is a non-contact meter that analyses light reflected off a moving object and coverts it into an accurate rpm figure. Micro computer technology offers highly accurate measurements and fast measuring time while straightforward single button operation and large LCD display makes the CT1 easy to use and read.
•Measurement range 5 to 99,999 rpm
•Resolution - 0.1 rpm under 1000 rpm & 1 rpm above 1000 rpm
•Accuracy - ± (0.05% + 1 digit)
•Sampling time 1 sec. (over 6 rpm)
•Includes reflective measuring strips
•Uses 4 x 1.5v AA (UM-3) type alkaline batteries (not included)
Digital Contact Tachometer
Hand Tools > Measuring > Measuring
CLARKECT2
The CT2 hand held digital tachometer is a contact meter that uses a cone tip and rubber wheel to measure moving objects and covert the data into an accurate rpm, ft/min or mtrs/min figure. Micro computer technology offers highly accurate measurements and fast measuring time while straightforward single button operation and large LCD display makes the CT2 easy to use and read.
•Measurement ranges - 5 to 19,999 rpm, 0.05 to 1999.99 m/min & 0.2 to 6560 ft/min
•Resolution - 0.1 rpm under 1000 rpm & 1 rpm above 1000 rpm
•Accuracy - ± (0.05% + 1 digit)
•Sampling time 1 sec. (over 6 rpm)
•Uses 4 x 1.5v AA (UM-3) type alkaline batteries (not included)
•Tough ABS plastic casing
Infrared Thermometer (12:1)
Hand Tools > Measuring > Measuring
CLARKEIRT1
Allows temperature measurements to be taken without contact being made. Ideal for many diagnostic uses including measuring temperatures of car engine components, tyre temperature readings for race cars or general diagnosis of engine and vehicle faults.
Allow measurements to be taken without contact being made
Ideal for the diagnosis of engine and vehicle faults
Compact thermometer with wide temperature range (-20°C to 520°C)
Displays in Celsius or Fahrenheit
Large, easy to read LCD temperature panel
Laser pointer to show area being sampled
CM 120 VERNIER CALIPER
Hand Tools > Measuring > Measuring
CM120
A precision 4 way measuring caliper in high grade stainless steel for values in the range 0-12" (0-300mm) covering internal, external, height and step. Accuracy assured for a broad range of industrial and automotive calculations.
•Dual scale calibration in 0.02mm/0.001" units
•Locking screw features for batch measurements.
•Supplied in strong protective case.
LASER/CONTACT TACHO DT2236C
Hand Tools > Measuring > Measuring
DT2236C
Measuring Range: Photo Tach 2.5 to
99,999
Contact Tach 0.5 to 19,999RPM
Surface Speed 0.05 19,999 (m/min.)
Accuracy: ±(0.05% + 1 digit)
Sampling time: 0.8sec.(over 60RPM)
Test Range Select: Automatic.
Memory: Max.value, Min.value,
Last value Detecting distance:
50 to 500mm
Time base: Quartz crystal
STROBOSCOPE TACHOMETER DT2239B
Hand Tools > Measuring > Measuring
DT2239B
Freeze pulleys, gears, fans, motors
and other spinning equipment
with the Norse Tools Stroboscope
Tachometer! This is the ultimate tool
for those hard to reach problems.
Easy to use and deadly accurate.
Engineers Squares
Hand Tools > Measuring > Engineers Squares
Engineers Squares
90Degree Precision Right Angle
Precision ground to ensure straightness and accuracy
Spring Steel Blade is hardened and tempered for increased durability
