Features Brushless Motor Technology for up to 50% more run time, increased power and extended durability with essentially no maintenance
Powered by a 3.0Ah Lithium Ion slide-type battery for fade free power, less weight and 3x the total battery life of a traditional battery
Professional grade motor produces 184 ft-lbs of turning torque, 3,200 BPM and up to 2,600 RPM to power through the toughest jobs
4-Stage electronic speed switch for precision and control
1/2" Square drive for quick and easy socket replacements
Limited and continuous impact modes for ultimate control when driving small fasteners or driving into soft material
Optical trigger switch provides a more responsive variable speed actuation and wear resistant trigger assembly
Built-in LED light maximizes efficiency in low-light work areas
Battery level indicator displays the amount of power remaining in the battery pack to avoid downtime
Metal belt hook so the tool is always close at hand
Ergonomic and lightweight at 3.7 lbs to reduce fatigue during extended or elevated use

Professional grade motor producing a no-load speed of 1.500 RPM, 2,000 impacts per minute, and an impressive 354 foot-pounds of torque
Tumble trigger switch for easily switching from tightening to loosening
Battery level indicator to anticipate battery swap downtime
Built-in LED light to provide an optimal view of the application area
High capacity 4.0Ah batteries for 33% more run time

New high durability hammering mechanism

Approximately twice the durability of previous models

Up to 30% faster drilling speed

High impact energy of 3.2 Joules

Low vibration design with double moulded side handle

3 mode action with large change lever

Angle adjustment function for easy alignment of chisel blades

One push action for easy bit mounting

Fastest drilling speed in its class

Compact design

Forward and reverse

Idle stricking prevention mechanism extends service life

3 mode function: rotary drilling, hammer drilling and hammer only

High impact energy of 3.5 Joules

Drill bit not included



Capacity Concrete (drill): 4-28mm

Capacity Concrete ( TCT core): 80mm

Capacity Steel: 13mm

Capacity Wood: 32mm

Power: 720W

No-Load Speed: 0-1150/Min

Full Load Impact Rate: 0-4600/Min

Impact Energy: 3.2J

Weight: 2.4Kg

Fastest drilling speed in its class

Compact design

Forward and reverse

Idle stricking prevention mechanism extends service life

3 mode function: rotary drilling, hammer drilling and hammer only

High impact energy of 3.5 Joules

Drill bit not included



Capacity Concrete (drill): 4-28mm

Capacity Concrete ( TCT core): 80mm

Capacity Steel: 13mm

Capacity Wood: 32mm

Power: 720W

No-Load Speed: 0-1150/Min

Full Load Impact Rate: 0-4600/Min

Impact Energy: 3.2J

Weight: 2.4Kg

Powerful 960W motor

Safety clutch

High impact enery of 9 Joules

Single speed motor

2 mode action (rotary hammer driling and hammer only)

Soft grip front and rear handles

Variable lock mechanism allows chisels to be set at 12 positions

Drill bit not included

Powerful 960W motor

Safety clutch

High impact enery of 9 Joules

Single speed motor

2 mode action (rotary hammer driling and hammer only)

Soft grip front and rear handles

Variable lock mechanism allows chisels to be set at 12 positions

Drill bit not included

Variable speed

Constant speed control

Safety clutch

Auto stop brushes

Two mode action

Drill bit not included



Capacity Concrete (Drill): 40mm

Capacity Concrete ( TCT core): 105mm

Bit Shank: SDS-Max

Power: 950W

No-Load Speed: 240-480/Min

Full Load Impact Rate: 1320-2650/Min

Impact Energy: 10.5J

Weight: 6.8Kg

Variable speed

Constant speed control

Safety clutch

Auto stop brushes

Two mode action

Drill bit not included



Capacity Concrete (Drill): 40mm

Capacity Concrete ( TCT core): 105mm

Bit Shank: SDS-Max

Power: 950W

No-Load Speed: 240-480/Min

Full Load Impact Rate: 1320-2650/Min

Impact Energy: 10.5J

Weight: 6.8Kg

Variable speed

Constant speed control

Safety clutch

Auto stop brushes

Two mode action

Drill bit not included



Capacity Concrete (Drill): 45mm

Capacity Concrete ( TCT core): 125mm

Bit Shank: SDS-Max

Power: 1200W

No-Load Speed: 120-240/Min

Full Load Impact Rate: 1200-2500/Min

Impact Energy: 15.5J

Weight: 8.0Kg

Variable speed

Constant speed control

Safety clutch

Auto stop brushes

Two mode action

Drill bit not included



Capacity Concrete (Drill): 45mm

Capacity Concrete ( TCT core): 125mm

Bit Shank: SDS-Max

Power: 1200W

No-Load Speed: 120-240/Min

Full Load Impact Rate: 1200-2500/Min

Impact Energy: 15.5J

Weight: 8.0Kg

Variable speed

Two speed gearbox

Two mode action

Keyless chuck

Reverse mode

Soft Grip Handle





Drilling Capacity Brick: 20mm

Drilling Capacity Steel: 13mm

Drilling Capacity Wood: 40mm

Chuck Capacity: 13mm

Power Input: 790W

No-Load Speed: 0-1000/3000/min

Full Load Impact Rate: 0-13000/39000/min

Weight: 2.2Kg

Variable speed

Two speed gearbox

Two mode action

Keyless chuck

Reverse mode

Soft Grip Handle





Drilling Capacity Brick: 20mm

Drilling Capacity Steel: 13mm

Drilling Capacity Wood: 40mm

Chuck Capacity: 13mm

Power Input: 790W

No-Load Speed: 0-1000/3000/min

Full Load Impact Rate: 0-13000/39000/min

Weight: 2.2Kg

Class leading torque- 270 ft-lbs for maximum power
Powerful 4.2 Amp, 480 W motor to handle stubborn fasteners
Forward-reverse rocker switch to quickly change fastening direction
Covered in soft, yet durable elastomer for improved durability and a non-slip grip
Large bumper protects the tools gear cover
Compact and lightweight at only 10.15 inches in length and 6.2 lbs

Class leading torque- 270 ft-lbs for maximum power
Powerful 4.2 Amp, 480 W motor to handle stubborn fasteners
Forward-reverse rocker switch to quickly change fastening direction
Covered in soft, yet durable elastomer for improved durability and a non-slip grip
Large bumper protects the tools gear cover
Compact and lightweight at only 10.15 inches in length and 6.2 lbs

Professional grade motor producing a no-load speed of 1.500 RPM, 2,000 impacts per minute, and an impressive 354 foot-pounds of torque
Tumble trigger switch for easily switching from tightening to loosening
Battery level indicator to anticipate battery swap downtime
Built-in LED light to provide an optimal view of the application area
High capacity 4.0Ah batteries for 33% more run time

Powerful 7.5 Amp (850 Watt) motor produces an amazing 450 ft/lbs of tightening torque (class leading) to tackle the toughest jobs with ease
Compact and lightweight
Double insulated cast aluminum body (IDI- Internal Double Insulation Technology) provides strong protection for the motor, greatly increasing durability and extending tool life
Large heat-resistant bumper protects the tool, workpiece and the user
Forward/Reverse rocker switch to quickly change fastening direction
Slip resistant elastomer handle improves grip and minimizes user fatigue

Powerful 7.5 Amp (850 Watt) motor produces an amazing 450 ft/lbs of tightening torque (class leading) to tackle the toughest jobs with ease
Compact and lightweight
Double insulated cast aluminum body (IDI- Internal Double Insulation Technology) provides strong protection for the motor, greatly increasing durability and extending tool life
Large heat-resistant bumper protects the tool, workpiece and the user
Forward/Reverse rocker switch to quickly change fastening direction
Slip resistant elastomer handle improves grip and minimizes user fatigue