900 Series - Twin Beam for 931 Bearing Separator Puller
205mm Long

• Twin beam mechanical puller for use with Sykes-Pickavant split collet type internal extractors.
• Mechanical force screw can then be used to draw extractors in place of slide hammer.

• 1500 Series - Nose Piece for 1500 Hydraulic Ram

Combines 15510500 and 19310500 to make the most comprehensive set of pulling, separating and extracting options available.

• Ideal workshop set for applications where a wide variety of pulling and extracting problems are likely to be encountered on daily basis.
• Supplied on 2 x wall mounted storage panels for ease of use and access.

• With tapered edge for insertion behind close fitting bearings, gears etc.
• Drop forged, high quality alloy steel, heat treated for strength and durability.
• Users should also use correct thread protector to fit bearing puller.
• Each kit supplied in metal case.

External Spread Min - Max: 0 - 55mm
External Reach Max: 115mm

Basic pulling units excluding the bearing separator can be supplied if required. These include a basic twin beam, screw, thrust nut, thrust race and main rod assembly.
Kit No. 09300000 = Pulling Unit No. 09400000

Contents:
09301200 1 x Beam
08281100 1 x Screw / Nut Thrust
09301500 2 x Main rods, nuts & washers
09500000 1 x Separator

• Pulling unit with small capacity separator and thin jaw legs will remove bearings inaccessible to standard puller jaws.
• Supplied in carton.

Spread Max: 75mm
Reach Max: 75mm
External Spread Max: 55mm

Contents:
08281100 1 x Forcing Screw
08601400 2 x Leg 75mm - Thin Jaw
09301200 1 x Beam Twin
09301500 2 x Main Rod
09500000 1 x Separator 10-55mm
 

With tapered edge for insertion behind close fitting bearings, gears etc.
Drop forged, high quality alloy steel, heat treated for strength and durability.
Users should also use correct thread protector to fit bearing puller.
Each kit supplied in metal case.

External Spread Min - Max: 20 - 105mm
External Reach Max: 75mm

Basic pulling units excluding the bearing separator can be supplied if required. These include a basic twin beam, screw, thrust nut, thrust race and main rod assembly.
Kit No. 09310000 = Pulling Unit No. 09410000

Contents:
09311200 1 x Beam
09311100 1 x Screw / Nut Thrust
09312100 1 x Thrust race
09311500 2 x Main rods, nuts & washers
09312300 2 x 5" Extension Rods
09311900 4 x Extension Rods
09510000 1 x Separator
 

Kit can be upgraded for internal pulling by adding 09350000

With tapered edge for insertion behind close fitting bearings, gears etc.
Drop forged, high quality alloy steel, heat treated for strength and durability.
Users should also use correct thread protector to fit bearing puller.
Each kit supplied in metal case.

External Spread Min - Max: 35 - 140mm
External Reach Max: 860mm

Basic pulling units excluding the bearing separator can be supplied if required. These include a basic twin beam, screw, thrust nut, thrust race and main rod assembly.
Kit No. 09320000 = Pulling Unit No. 09420000

Contents:
09321200 1 x Beam
09321100 1 x Screw / Nut Thrust
09322100 1 x Thrust race
09321500 2 x Main rods, nuts & washers
09322300 2 x 5" Extension Rods
09321900 4 x Extension Rods
09520000 1 x Separator

Kit can be upgraded for internal pulling by adding 09350000

900 series - Twin Beam for 932 Bearing Separator Puller
290mm Long M24

Thread Protector - 38mm Long (5/8” x 14 BSF)
When ordering an internal pulling attachment users should also order the correct thread protectors to fit their pulling unit or bearing puller kit.

For use with:
Pulling Unit Part No. 09420000
Pulling Kit Part No. 09320000
 

Pulling attachment for Sykes-Pickavant bearing pullers, part number 09330000.
Users should also use correct thread protector to fit their bearing puller.
Supplied in carton.

Internal Reach Min - Max: 75-230mm
External Reach Max: 150mm

Use with 09330000 Kit* - Use screw adaptor 09360100
*Thread Protectors - When ordering an internal pulling attachment users
should also order the correct thread protectors to fit their pulling unit or bearing puller kit.

Pulling Unit Part No. 09410000 / Pulling Kit Part No. 09310000
Use thread protectors Part No. 09312000 (2)

Pulling Unit Part No. 09420000 / Pulling Kit Part No. 09320000
Use thread protectors Part No. 09322000 (2)

Pulling Unit Part No. 09430000 / Pulling Kit Part No. 09330000
Use thread protectors Part No. 09332000 (2)

900 Series - Pulling Unit for use with 09500000 Separator Comprises: Twin Beam, Screw and Pulling Rods (2)

Suitable for use with 19310500, 15530500

• Makes 5 different mechanical puller/separator combinations.
• Consists of a thin jaw puller, reversible leg puller and separator the ideal combination for light applications.
• Supplied in carton

Spread Max: 140mm
Reach Max: 89mm
External Spread Max: 155mm

Contents
08281100 1 x  Forcing Screw
08601400 2 x Leg 75mm - Thin Jaw
09301200 1 x Twin Beam
09301500 2 x Main Rod
08271100 1 x Forcing Screw
09500000 1 x Separator 10-55mm
08271200 1 x Twin Head
08271300 1 x Triple Head
08271400 3 x Leg - Double Ended Reversible

• For the extraction of bushes, sleeves and bearings from blind housings, when the centre shaft has been removed and does not allow the use of a mechanical puller.
• Supplied in carton.

Internal Reach Min - Max: 40 - 150mm
External Reach Max: 100mm

• Individual separators for removing and refitting bearings, etc.
• Can be used with any of the Sykes-Pickavant design of pullers where standard legs cannot gain access.
• Tapered legs provide all round support.
• Supplied in carton.

External Spread Min - Max: 50 - 175mm

Can be used with Sykes-Pickavant ‘Loadstar’ Heavy Duty Pullers or 09430000 Twin Leg Pulling Unit

Hydraulic 1500 series

• Makes 6 different twin/triple leg pullers, plus bearing separator kit.
• Supplied in lockable metal case.

Puller Spread Min - Max: 50-200mm
Puller Reach Max: 200mm
External Spread Min - Max: 20-105mm
External Reach Max: 876mm

Contents:
15000000 1 x Hydraulic Ram With Nose Piece
15241200 1 x Twin Head
15341300 1 x Triple Head
15242200 1 x Ram Extension - 50mm
15262400 1 x Ram Extension - 100mm
15242400 3 x Legs - 100mm
15262600 3 x Legs - 150mm
15282800 3 x Legs - 200mm
19311200 1 x Twin Beam
09510000 1 x Separator 20-105mm
09311500 2 x Main Rods
09311900 4 x Extension Rods
09312300 2 x Extension Rods 5 inch

Hydraulic 1500 series

• Removes gears, bearings, pulleys and sprockets.
• Wide range of automotive and industrial applications.
• Powered by 1500 series hydraulic ram.
• Safe and easy to use.
• 8 tonnes of force with minimum effort.
• Easy to adjust.
• Non-twisting for improved stability.
• Supplied with nose piece for use on centred shafts.

Contains:
1 x Hydraulic Ram
1 x Triple Head Assembly or Sliding Beam
1 x Ram Extension
3 x Legs

Thin jaws enable acccess where clearance behind components is limited.
Supplied in carton.

Specifications
Puller Spread Min - Max: 50 - 150mm
Puller Reach Max: 150mm
Ram Extension: 50mm

Triple Beam
 

See Downloads section for Kit Contents List

Hydraulic 1500 series

• Versatile tool where a long reach is required to draw a bearing from a shaft.
• Also available without hydraulic ram as kit 19310100 (in carton).
• The tapered edges of the bearing separator provide all round support and can fit behind bearings where normal puller legs cannot gain access.
• Supplied in metal case.

External Spread Min - Max: 20 - 105mm
External Reach Max: 876mm

Contents:
15000000 1 x Hydraulic Ram With Nose Piece
15262400 1 x Ram Extension - 100mm
19311200 1 x Twin Beam
09510000 1 x Separator 20-105mm
09311500 2 x Main Rods
09311900 4 x Extension Rods
09312300 2 x Extension Rods 5 inch

• Combination pack consisting of a medium duty hydraulic thin jaw puller and bearing separator.
• Also available without hydraulic ram as kit 19310400 (in carton).
• Supplied in carton.

External Spread Min - Max: 50 - 105mm
External Reach Max: 876mm

Contents:
15000000 1 x Hydraulic Ram With Nose Piece
15262400 1 x Ram Extension - 100mm
08611400 2 x Legs 150mm - Thin Jaw
19311200 1 x Twin Beam
09510000 1 x Separator 20-105mm
09311500 2 x Main Rods
09311900 4 x Extension Rods
09312300 2 x Extension Rods 5 inch

Hydraulic 1500 series

• For removing bearings, gears etc. where access behind components is too restricted to use standard pullers.
• Drop forged, high quality steel, heat treated for strength and durability.
• Extract components quickly and efficiently when conventional pullers can not be used.
• Slide Hammer with 7 split collet internal extractors
• Supplied in display/storage panel - 610mm x 457mm

External Spread Min - Max: 10-105mm
Internal Reach Min - Max: 6-38mm
External Reach Max: 876mm

Contents:
15000000 1 x Hydraulic Ram With Nose Piece
19311200 1 x Twin Beam
08601400 2 x Legs 75mm - Thin Jaw
09500000 1 x Separator 10-55mm
09510000 1 x Separator 20-105mm
09311500 2 x Main Rods
09311900 4 x Extension Rods
09312300 2 x Extension Rods 5 inch
09350000 1 x Internal Race Extractor
08542100 1 x Slide Hammer
09580900 1 x Split Collet Extractor 6.5 - 8mm
09581000 1 x Split Collet Extractor 8.5 - 10mm
09581100 1 x Split Collet Extractor 10 - 12mm
09581200 1 x Split Collet Extractor 12 - 17mm
09581300 1 x Split Collet Extractor 19 - 22mm
09581400 1 x Split Collet Extractor 22 - 30mm
09581500 1 x Split Collet Extractor 30 - 38mm
09582000 1 x Adaptor
09400000 1 x Pulling Unit
15512800 1 x Metal Panel
19312900 1 x Hook Kit
 

Twin Beam - 210mm long
1½” Dia. Internal

See Downloads section for Kit Contents List

Hydraulic 1500 series

• Versatile tool where a long reach is required to draw a bearing from a shaft.
• Also available without hydraulic ram as kit 19310100 (in carton).
• The tapered edges of the bearing separator provide all round support and can fit behind bearings where normal puller legs cannot gain access.
• Supplied in metal case.

External Spread Min - Max: 35 - 140mm
External Reach Max: 863mm

Contents:
15000000 1 x Hydraulic Ram With Nose Piece
15272600 1 x Ram Extension - 150mm
19321200 1 x Twin Beam
09520000 1 x Separator 35-140mm
09321500 2 x Main Rod
09321900 4 x Extension Rod
09322300 2 x Extension Rod 5 inch

Leg Extension incl. Pins & Nuts for Loadstar "Plus" 20T, 30T and 50T kits

Loadstar Press Frame Assembly

460 x 165mm max / 365 x 165mm min
Max Pushing Pin Diameter : 50mm Max
Pushing Pin length : 150mm (when used with 20012000 hydraulic cylinder)
For use with 20012000 Loadstar 20 tonnes Hydraulic Cylinder