- Comprising:
- U.32T2-8: 2-tonne sliding-leg puller and set of long legs; reach P1: 105 mm P2: 185 mm.
- U.32T6-20: 6-tonne sliding-leg puller and set of long legs; reach P1: 150 mm P2: 280 mm.
- U.53T2: separator (spread 15 to 110 mm).
- U.33A: 30 tonne jack.
- Supplied in metal case. BT.108 with tray PL.287 (removable tray) and PL.288 (box bottom tray).
- Dimensions: 450 x 270 x 110 mm.
Weight: 14.500 kg.

- This complete set offering normal pulling power for all general engineering applications.
- Comprising:
- U.35L (spread 15 to 75 mm) and U.34 (spread 40 to 180 mm): wide leg pullers for outside grip pulling.
- U.51B: bearing inside puller (spread: 32 to 70 mm).
- U.40: beam.
- U.33A: 30 tonne jack.
- Supplied in a steel case BT.108 with tray PL.195A.
- Dimensions: 452 x 286 x 111 mm.
Weight: 13.300 kg.

- Comprising:
- 1 clamp puller for outside grip = U.306A140 (spread 7 to 140 mm).
- 2 sets of 3 long legs for outside grip = U.306G10 (spread 10 to 180 mm) and U.306G15 (spread 20 to 260 mm).
- 2 sets of 3 legs for inside grip = U.306G2 (spread 23 to 130 mm) and U.306G20 (spread 60 to 170 mm).
- 1 long screw with tip U.306-3.
- 1 beam U.40 (attached using ring and nut U.306A1 supplied with the kit).
- 1 slide hammer U.306M.
- Presented on the PK.1 panel.
- Dimensions: 444 x 888 mm.
Weight: 12.400 kg.

- Comprising:
- 2 slim leg pullers for outside grip = U.301 and U.302 (spread 10 to 80 mm).
- 4 clamps for inside grip = U.49P1 to U.49P4 (spread 6.5 to 18 mm).
- 1 slide hammer U.49L.
- 1 separator for difficult outside grip = U.53T1 (spread 5 to 60 mm) and its beam U.53K1.
- Presented on the PK.2 panel.
- Dimensions: 444 x 444 mm.
Weight: 4.300 kg.